Internal Cable Routing - Lenovo ThinkSystem SR550 Setup Manual

Callout
Power supply 2 connector
17
Power supply 1 connector
19
SATA 0-3 connector
21
Riser 2 slot
23
Notes:
• 1 Trusted Cryptography Module
• 2 Trusted Platform Module

Internal cable routing

Some of the components in the server have internal cables and cable connectors.
To connect cables, observe the following guidelines:
• Power off the server before you connect or disconnect any internal cables.
• See the documentation that comes with any external devices for additional cabling instructions. It might
be easier for you to route cables before you connect the devices to the server.
• Cable identifiers of some cables are printed on the cables that come with the server and optional devices.
Use these identifiers to connect the cables to the correct connectors.
• Ensure that the relevant cables pass through the cable clips.
Figure 14. Cable clips
ThinkSystem SR550 Setup Guide
28
Callout
Internal USB connector
18
SATA 4-7 connector
20
M.2 module slot
22