Lenovo ThinkSystem SR550 Setup Manual page 66

"Read the
installation
Guidelines" on
page 46
Notes: Your server supports up to two 2.5-inch SATA/SAS 8-bay backplanes. Depending on the backplane
quantity, the installation location of the backplanes varies.
• One backplane: Always install the backplane to drive bays 0–7.
• Two backplanes: Install the two backplanes to drive bays 0–7 and drive bays 8–15.
Before installing the 2.5-inch-drive backplane, touch the static-protective package that contains the new
backplane to any unpainted surface on the outside of the server. Then, take the new backplane out of the
package and place it on a static-protective surface.
To install the 2.5-inch-drive backplane, complete the following steps:
Watch the procedure. A video of the installation process is available:
• YouTube:
https://www.youtube.com/playlist?list=PLYV5R7hVcs-C9jFjZnXQ6AmTXaIdX6_HJ
• Youku:
http://list.youku.com/albumlist/show/id_50429987
Step 1. Determine the location of the backplanes to be installed.
Step 2. Connect the cables to the backplane.
ThinkSystem SR550 Setup Guide
62
"Power off
the server
for this task"
on page 90
"ATTENTION:
Static Sensitive Device
Ground package before opening"
on page 48