Table of Contents
Advertisement
Available languages
Available languages
HOW TO USE THE GRIDDLE
The griddle must be placed over
the central burner; the correct
position as shown in fig. 12 is ar-
chived by correct locking over
the pan support.
The griddle has been designed
for cooking of foodtuffs, do not
place pans, kettles or pots on the
griddle.
WARNING
The griddle reaches high tempe-
ratures during use, please ensu-
re adequate cooling down time is
allowed after use.
The frequent use of the griddle
may cause a slight discoloura-
tion of the hobplate, this is per-
fectly normal and does not alter
the working performance of the
hob.
(see fig. G)
Correct position of griddle
Flame guard must face the front of the hob
Fig. 12
Incorrect position of griddle
Fig. 13
48
USE OF ELECTRIC HOTPLATES OR CERAMIC ELEMENTS.
For the best use of the electric hotplates and to minimise energy consumption, the fol-
lowing recommendations should be noted.
food stuff
power setting
OFF
VERY LOW
Warming dishes & melting butter and chocolate
LOW
Simmering, sauces, stews, milk puddings, poached eggs
MODERATE
Vegetables, frozen foods, boiling water
MEDIUM
Fresh Vegetables, pasta, fish, pancakes.
HIGH
Omelettes, steaks
VERY HIGH
Chops
The light indicates the hotplate is on irrespective of the power setting.
In the vetroceramic hobs a residual heat indicator light comes on and remains lit till the
hob plate is cooled down.
A neon indicator light adjacent to the control knob will glow when the electric plate is
in use.
The additional electric hotplate/ring (ø 80 mm) where featured is turned on and off by
pressing 0/I button,this hotplate has a fixed heat setting.
Only pans which have smooth flat bases should be used on the electric hotplates. The
size of the pan should be as close as possible to the diameter of the hotplate, and ne-
ver smaller (see Fig. 14). The base of the pan should be dry and spillages should be
avoided. Empty pans should not be left on the plates, nor should the plates left switched
on without a pan.
(Ceramic hobs or similar): "WARNING - should any crack appear on the surface turn
the appliance off to prevent potential electric shock.
MAINTENANCE AND CLEANING
Before cleaning the Hob, ensure the appliance has cooled down. Remove the plug from
the socket or (if connected directly) switch off the electricity supply.
When cleaning the enamelled, varnished or chrome sections, use warm soapy water
or a non caustic detergent. For stainless steel use an appropriate cleaning solution.
Hotplates should only be cleaned with a cotton cloth coated with vaseline or seed oil.
GB IE
GB IE
YES
NO
NO
NO
49
No. setting ce-
No. setting
rapid hotplate
ramic element
0
0
1
1
2
3
2
4
3
4
5
6
NO
Fig. 14
Advertisement
Table of Contents
