TECHNICAL CHARACTERISTICS INSTRUCTIONS FOR THE INSTALLER Tab. 1 INSTALLATION Cooking hobs Burners 4 gas 4 gas 3 gas 4 gas The Purchaser is responsible for the installation of the hob. The Manufacturer does not – 1 electric 1 electric – accept any responsibility for any damage or loss resulting from incorrect installation, Reference type (Type)
Page 3
If the hob is fitted above an oven which is not equipped with fan cooling system it is re- ELECTRICAL CONNECTION (FOR U.K. ONLY) commended that openings are created within the built in furniture to ensure correct air Warning - this appliance must be earthed circulation.
ELECTRICAL CONNECTION To prevent any potential damage to the hob please carry out the installation following this sequence: Check the data on the rating plate, located on the outside of the unit, to ensure that the supply and input voltage are suitable. Before connection, check the earthing system.
Page 5
When you have carried out the new gas regulation, replace the old gas rating pla- Table of gas consumption 1W = 0,860 kcal/h Quota «X» depending on type of gas te on your appliance with one (supplied with hob) suitable for the type of gas for G20 20mbar G20/G25 G30 29mbar...
If over the years the gas taps become stiff to turn it is necessary to lubricate them. MAINTENANCE AND CLEANING Such operation must be carried out only by qualified Service Engineers. Some model are equipped with a small steak griddle. This is only to be used over the Before cleaning the Hob, ensure the appliance has cooled down.