Instrument Setup - Step By Step - Partec CyFlow space Instrument Operating Manual

Instrument Setup – Step by Step
Fig. 9: Computer connection on the CyFlow
space rearside.
Fig. 10: Power connection and laser switch on the
left side of the CyFlow® space.
Fig. 11: Tube connections for sheath and waste
containers and cable connections for the fluid
level sensors on the right side of the CyFlow
space.
Rev. 007 Date 2010-01-13
Note: Before first operation remove protection
material from inside the system!
1. Setting up the Computer
Connect printer, screen, keyboard and mouse to
the computer with the appropriate connection
cables.
Connect computer, screen and printer to AC
power line.
2. Connecting the CyFlow
®
The CyFlow
100/240 V 50/60 Hz.
3. Connecting the CyFlow
Computer
The CyFlow
®
®
Windows PC or notebook (optional). This makes
the latest computer technology available at any
time. The integrated FloMax
functions of the CyFlow
settings, sample supply, sheath pressure and
sample flow rate.
The Computer connections of the CyFlow
are located at the rear side of the instrument.
Connect the CyFlow
with the interface cable. The laser connection is
only required for the 200 mW 488 nm laser.
There is a CCD camera inside the CyFlow
optical bench to monitor the focus of the objective
and the sample flow inside the cuvette. Connect
the camera signal outlet (CCD) to the Video In
connection of the computer with the video
connection cable.
Network support of the CyFlow
through a standard ethernet connection by the
®
Windows computer.
®
Windows manuals for details on how to set up a
network connection.
4. Connecting the CyFlow
and waste containers
Connect the sheath tube and the air tube of
the sheath fluid container to the corresponding
connectors at the right side of the CyFlow
Connect the waste fluid container to the waste
outlet at the right side of the CyFlow
All tubes are labeled accordingly.
Note
Make sure that the sheath and waste fluid bottles
stand on the same level as the instrument to
®
prevent that hydrostatic pressure is influencing the
sheath fluid pressure.
®
CyFlow
®
space to power line
space must be operated with AC
®
®
space runs with a standard
®
software controls all
®
space, e.g. instrument
®
space to the computer
®
space is provided
Please refer
®
space to sheath
®
space Instrument Operating Manual
space to a
®
space
®
space
to the
®
space.
space.
20/26