modway EEI-2677 Assembly Instructions

Table

EEI-2677

TABLE

Thank you for purchasing the MODWAY TABLE！

Before you start, here is some helpful advice:

1.We suggest you spend a short time reading through this leaflet and then follow the simple step-by-step

instructions.

2.Owing to the size and weight of the table, we recommend that it is assembled by two adults, on a carpeted or

padded area, in the room that it is intended for. Approximate assembly time: 30 minutes.

3.Please do not use any tools other than those provided or recommended in these instructions.

4.Please do not throw away any of the packaging or the instruction until you have checked all the components and

hardware and the furniture is fully assembled. Please ensure that the packaging is disposed of in a safe and

environmentally friendly way.

5.Assemble all components loosely until advised to tighten. Depending on use, it may be necessary to tighten the

components from time to time, so please save the tools that have been provided.

6.Please keep all fitting out of reach of children.

Table Top

Customer Service 908-368-1025︱www.modwayfurniture.com

Screw M4x100mm

PHILLIPS HEAD SCREW DRIVER

NOT PROVIDED

x12

Table Leg

Page 1 of 2

Table of Contents

Need help?

Do you have a question about the EEI-2677 and is the answer not in the manual?

Page 1 EEI-2677 TABLE Thank you for purchasing the MODWAY TABLE！ Before you start, here is some helpful advice: 1.We suggest you spend a short time reading through this leaflet and then follow the simple step-by-step instructions. 2.Owing to the size and weight of the table, we recommend that it is assembled by two adults, on a carpeted or padded area, in the room that it is intended for.
Page 2 EEI-2677 TABLE STEP 1: Please put the Table Top (1) upside down on a carpeted or padded area. Position 1 piece of Table Leg (2) to the bottom of Table Top (1) as shown. Secure 4 pieces of Screw (A) into the hole on bottom of Table Top (1) through the hole on Table Leg (2).