Table of Contents
Advertisement
7
Installation
7.1
Installing the device
To electrically connect and switch on the device, follow the procedure below:
Connect supplied antennas to the device screwing them into the SMA connector.
1
Antennas
PN: W1043
o
For earth connection, using the screw supplied, tighten the eyelet of the yellow-green
2
cable of the power supply to the hole under the power connector as showed in the
following images:
Screw
type: M3 TC
o
o width I=4mm
compliant UNI 7687-77 - DIN 7985
o
Connect the power supply to the device using the jack connector supplied. Once
3
inserted, turn the connector clockwise in order to lock it in place.
Using the power cord supplied, connect the power supply to the mains to power the
4
device.
Power cord
PN: GJ37020
o
Press the ON/OFF button on the device.
5
Information subject to change. Please visit
to find the latest version of this manual. Page.19 of 29
www.seco.com
SYS-D14-MED
Advertisement
Table of Contents
