Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Seco SYS-D14-MED
- Page 1 SYS-D14-MED INSTALLATION, USE AND WARNINGS MANUAL Edition: 11 - 2020...
-
Page 2: Table Of Contents
Manufacturer identification ......................... 5 Device identification ............................5 Device identification plate ........................... 5 Technical specifications ............................6 SYS-D14-MED device hardware specifications ................... 6 Software Specifications ..........................7 CE reference directives ..........................7 FCC disclaimer ..............................8 IC disclaimer ............................... 8 Safety devices................................. - Page 3 SYS-D14-MED Installing the device ............................19 Versions available ............................23 Maintenance ................................24 Waste disposal ............................... 24 Electromagnetic Compatibility........................25 Information subject to change. Please visit to find the latest version of this manual. Page.2 of 29 www.seco.com...
-
Page 4: Preliminary Information
Its purpose is to isolate the LAN (local area network) from the device to which it is connected. The SYS-D14-MED give to the user the possibility to take log files from the system, analyze them and upload them to a central repository, helping to create a remote inventory database. -
Page 5: Recipients
SYS-D14-MED Recipients This manual is intended for ordinary people and installers (expert users). Important! The user must read this manual before start with any kind of operation. Warranty The warranty shall be voided in the event of: failure to comply with safety regulations;... -
Page 6: Identification
The device is equipped with an identification plate located on the side. The plate features the device identification information to be reported to Seco S.p.A. if necessary. Caution! It is strictly forbidden to remove the identification plate and/or replace it with other plates. -
Page 7: Technical Specifications
SYS-D14-MED Technical specifications SYS-D14-MED device hardware specifications The table below features the board hardware specifications: Processor Atom E39xx Memory Up to 8 GB RAM Mass Storage Up to 64 GB eMMC 3x GBE • Wi-Fi + Bluetooth module on M.2 Key E (INTEL® WIRELESS- •... -
Page 8: Software Specifications
CE reference directives SECO S.p.A. places the device on the market, equipping and providing it with: CE marking as IT device Declaration of Conformity User manual Please also note that the device has been designed according to the following Directives:... -
Page 9: Fcc Disclaimer
SYS-D14-MED IEC 62366:2007 + A1:2014 During the IEC 60601-1-2 ESD test it might be happening monitor DP video interface splash. It is normal because DP video interface will be used only for maintenance and updating. FCC disclaimer This device complies with the FCC Rules and Contains Transmitter Module FCC ID: 2ALZB-D14MED NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. - Page 10 Information subject to change. Please visit to find the latest version of this manual. Page.8 of 29 www.seco.com...
- Page 11 SYS-D14-MED This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device.
-
Page 12: Safety Devices
SYS-D14-MED Safety devices Warnings Caution! It is the user’s responsibility to apply preventive and protective measures, in accordance with the legislation of the country of installation and use of the device. Caution! Only use the power supply, screw for ground connection, power cord and antennas supplied by the manufacturer. - Page 13 Warning! It is strictly forbidden for the patient/operator to touch the device during operation. Warning! Personnel training is a responsibility of the manufacturer of the device to which the SYS-D14-MED will be connected. Warning! Earth connection must be made correctly and the screw must not loosen during use.
-
Page 14: Safety Pictograms Affixed On The Device And Used In The Manual
SYS-D14-MED Safety pictograms affixed on the device and used in the manual The device and the manual are equipped with symbols, as indicated in the table below: PICTOGRAM DESCRIPTION CE marking FCC mark Danger of hot surfaces! Skin burns in case of contact. - Page 15 SYS-D14-MED WEEE/RAEE Indicates the separate collection of electronic and electrical equipment according to Directive 2012/19/EU. Symbol on the packaging of the device indicating the upper and lower Transportation temperature limit Symbol on the packaging of the device indicating that it must be protected from the rain “This way up”...
-
Page 16: Characteristics And Components Of The Device
SYS-D14-MED Characteristics and components of the device The SYS-D14-MED device is a gateway enclosed in a metal box with a heat sink. Caution! When running, the device can reach very high temperatures, causing the danger of burns when in contact with the heat sink. -
Page 17: Components
SYS-D14-MED Components Antenna Antenna connection for connection for radio module 4kV Insulated ON/OFF radio module connection Port Ethernet RESET button connection Information subject to change. Please visit to find the latest version of this manual. Page.15 of 29 www.seco.com... - Page 18 SYS-D14-MED Ports USB ports DP++ port Power supply Ethernet input Antenna Earth Antenna connection connection connection for for radio radio module module connection connection Information subject to change. Please visit to find the latest version of this manual. www.seco.com Page.16 of 29...
-
Page 19: Permitted Environmental Conditions
SYS-D14-MED Permitted environmental conditions environmental conditions Transport and storage The table below features permissible environmental conditions for transport and storage. Room temperature range - 10 ° C ÷ + 50 ° C Relative humidity range 5 % ÷ 90 %... - Page 20 Positioning the device in environments that do not correspond to those indicated shall render the warranty null and void for the parts to be replaced. SECO S.p.A. shall not be held liable if these instructions are not complied with. Information subject to change. Please visit to find the latest version of this manual.
-
Page 21: Installation
SYS-D14-MED Installation Installing the device To electrically connect and switch on the device, follow the procedure below: Connect supplied antennas to the device screwing them into the SMA connector. Antennas PN: W1043 For earth connection, using the screw supplied, tighten the eyelet of the yellow-green... - Page 22 SYS-D14-MED The power button is backlit by a LED when the device is on. The device does not generate system messages, error messages or fault messages. Warning! Only use the power supply supplied by the manufacturer. Warning! Earth supply mains connection must be made correctly and the screw must not loosen during use.
- Page 23 SYS-D14-MED To install the device properly on the destination machine, follow the procedure below: Make sure the electric connection on the destination machine is off and the electric power supply is disconnected from the device. Proceed to fasten the device to the destination machine, using the relative screws in points (A), indicated in the figure.
- Page 24 SYS-D14-MED To install the device properly on metal sheet/part/wall, follow the procedure below: Make sure the electric connection on the destination machine is off and the electric power supply is disconnected from the device. Proceed to fasten the device to the wall,...
-
Page 25: Versions Available
SYS-D14-MED-XXXX-X1XX-CX Option no Wi-Fi / BT module SYS-D14-MED-XXXX-XWXX-CX Option Wi-Fi / BT module The “X” in SYS-D14-MED-XXXX-1XX0-CX can be 0-9, A-Z, a-z or blank based on the OS and the installation methods. The “X” in SYS-D14-MED-XXXX-1XX0-CX refers to the revision number. -
Page 26: Maintenance
SYS-D14-MED Maintenance User should clean the product with a dry cloth when necessary, based on his visual inspection. Caution! Disconnect the device from any power source before cleaning. Warning! The enclosure of the device must be cleaned only with a dry cloth. -
Page 27: 10 Electromagnetic Compatibility
SYS-D14-MED 10 Electromagnetic Compatibility This device needs to be installed and put into service in accordance with the information provided in the user manual. WARNING: Portable RF communications equipment (including peripherals such as antenna cables and external antennas) should be used no closer than 30 cm (12 inches) to any part of the device, including cables specified by the manufacturer. - Page 28 SYS-D14-MED Electromagnetic immunity The device is intended for use in the electromagnetic environment specified in the following tables. The user should ensure that it is used in such an environment. Immunity Test Test Level EN 60601-1-2 Electrostatic discharge (ESD) ± 8 kV Contact EN 61000-4-2 ±...
- Page 29 SYS-D14-MED RF Electromagnetic immunity The device is intended for use in the electromagnetic environment specified in the following tables. The user should ensure that it is used in such an environment. Immunity Test Test Level Compliance Level Electromagnetic EN 60601-1-2...
- Page 30 SYS-D14-MED Recommended separation distance between portable and mobile radiocommunication devices and the device Note: (1) At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies. (2) These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and reflection from structures, objects, and people.
- Page 31 SYS-D14-MED Information subject to change. Please visit to find the latest version of this manual. www.seco.com Page.29 of 29...