Using The Transient Master; The Menu Bar - Native Instruments TRANSIENT MASTER Manual

2

Using the TRANSIENT MASTER

This section describes how to use the TRANSIENT MASTER.
2.1

The Menu Bar

At the very top of the TRANSIENT MASTER interface, you will see the Menu bar. This is pri-
marily used for saving and loading presets, but also has a few other functions.
The Menu bar is located at the top of the interface.
Saving and Deleting Presets
To save a preset:
1. Click the drop-down arrow to the very left of the Menu bar to open the File menu.
2. Select Save as... from the menu:
3. Enter the name of your preset in the area under the label
4. Click the SAVE button to finish the process and close the dialog box.
Using the TRANSIENT MASTER
New Preset Name.
TRANSIENT MASTER - Manual - 7
The Menu Bar