Section 5 • Maintenance/Service
Figure 5-21. Gaterotor Assembly
5 – 16
HPLD Single Screw Compressor • Installation, Operation and Service Manual • Emerson • 35391HP
4. Using Figure 5-21 as a guide, remove the screws
(110), and the washers (115).
5. Remove ball bearing housing cover screws (112 &
113), washers (116) and cover (106).
6. Remove ball bearing retainer screws (111), washer
(114), and retainer (109).
7. Remove shim pack (103) and O-ring (104-2).
8. Remove roller bearing housing (105).
9. Remove O-ring (104-3).