Page 1
Assembly Instructions Cross Back Chair After the sitting test, Assembly Instructions - Please keep for future reference 603/1822 re - tighten bolts again, if any adjustment needed. 603/3837 603/3820 It is highly recommend to re - tighten all the bolts again after using the chair for 7 days.
Page 2
Assembly Instructions Safety and Care Advice Important – Please read these instructions fully before starting assembly Attach lock seats by using screw • Check you have all the • Do not stand or put weight on • We do not shown in the figure.
Page 3
Assembly Instructions Components Parts If you have damaged or missing components, call the Customer Helpline: 08456 400800 Please check you have all the parts listed below Stand the chair on a floor. Insert bolts with spring washers washers through side rails holes into front leg frame screw all bolts...
Page 4
Assembly Instructions Components - Fittings Step 1 Please check you have all the fittings listed below pre - drilled hole Note :The quantities below are the correct amount to complete the assembly. In some cases more Attach left and right fittings may be supplied than are required.
Need help?
Do you have a question about the 603/1822 and is the answer not in the manual?
Questions and answers