Status Device; Symbol Description; Device Version - Fracarro MOD-WL16 Operating Instructions Manual

Table of Contents

Advertisement

Available languages

Available languages

4.4.4 Status device

The sub-menu Status displays the status of the wireless devices acquired in the MOD-WL16
wire- radio interface.
Status: checks the device status.
dNXXX ---#000000
DevicedN name
The device status displays information about the number, type and address of the device.
The following symbols represent the various device events:
Symbol
Description
+
Open device
Open tamper
Flat battery in one device
Device not detected
Device in test mode

4.4.5 Device version

Version: Display software version of the device.
5 - TEST
The Test menu of MOD-WL16 provides statistics and information about the transmission/ recep-
tion parameters of each device.
Reading: displays the status and the RSS, TX and CH of the last device that has sent a status
communication. Information updated after any new configuration.
Statistics: displays the statistics of each device acquired in MOD-WL16.
The statistic values are:
RSS: sensor feedback; this values ranges from 0 to 3
Re-transmission: number of transmissions done.
Channels: number of channels used for the detector-control panel transmission
Lost supervisions: number of detector-control panel missed supervisions
dN - serial number of the device
XXX - device name (assigned by the system)
--- - current status of the device
#000000 - House Address of the device
DevicedN name - device's name
(can be chosen by the installer)
18

Advertisement

Table of Contents
loading

Table of Contents