Fracarro MOD-WL16 Operating Instructions Manual page 12

MOD-WL16 features:
• Module which can be connected by a 4-wire BUS RS485
• Connectable to control panels Defender 64, 64T, 64M e 8 – 12 (only with T8N keypad)
• Menu of the modulo MOD-WL16 displayed on T8N keypad
• Can manage remote controls and sirens of the Defender WL series
• Can acquire more MOD-WL16 modules (64 input version)
M2
M1
Keys ACQ/DEF
RESET
AUX
TAMP
PC CONN
Terminals M1
M2
LED LED1
LED2
LED3
LED3
LED2
Module acquisition in the control unit
Reset key
AUX Jumper combined with Reset for FW update
TAMP jumper to signal the cover is being opened
Connector for the MOD-USB connection (for FW update only)
+12V power supply via BUS
BUS + Communication BUS
BUS - Communication BUS
GND Ground dedicated to BUS
+BAT Buffer battery input (to use if the interface is installed
in MOD-BOX)
GND Ground dedicated to the battery (to use if the interfa-
ce is installed in MOD-BOX)
Red LED to indicate the update status is incorrect
Red LED to indicate the signals from the radio devices are being
acquired and/or received
Green LED to indicate the status of the modules acquisition in the
control panel; permanently ON: the module is acquired; OFF: the
module is not acquired.
12
PC CONN
LED1
ACQ/DEF
AUX
TAMP
Reset
FIG 1