Fracarro MOD-WL16 Operating Instructions Manual page 17

the buzzer and 3 flashes from the LEDs.
BUS error: event activated because of a lack of Bus communication between the control panel
and the interface. It is signalised by the activation of the buzzer and LEDs for 4 minutes.
N.B. The activating alarm event is enabled by default.
4.4.3 Remote controls programming
The remote controls (identified by the RC symbol) acquired in the wire-radio interface can be
selected/programmed from the device list of the wireless expansion module.
Key 1...N:
Each key allows for the selection of one of the following options:
No action: no function enabled
Arm: activates the installation by a user
Unarm: deactivates the installation by a user
Burglary: carries out an intrusion alarm
Technologic: carries out a technologic alarm
Emergency: carries out an emergency alarm
Remote rescue: carries out a first aid alarm
Theft: carries out an anti-burglar alarm
Constraint: carries out a coercion alarm
Activate output: activates an output
Deactivate output: deactivates a manual output
Toggle Output: switches/inverts the control panel output
Panel status: checks the control panel status
17