Fracarro MOD-WL16 Operating Instructions Manual page 15

If, after the cover is placed onto the device, the R symbol flashes on the control panel display,
the device is still in the radio test mode. The device will quit this mode only if the tamper switch is
closed for more than 5 seconds.
IMPORTANT: the tamper protection can be activated only after all devices are recognized, after
leaving the test condition and closing all the covers of the devices.
To avoid false alarms, press the tamper key to discharge the capacitors before changing the
battery
The device that's acquired first, creates automatically a 4-line virtual module on the first available
line of the unit. As soon as the 4 lines of the module are all assigned, the 5th acquired device will
automatically turn the 4-line module into an 8-lines module.
The virtual module can host max 8 lines. Then , a new 4-line module will be created.
Even if the devices are deleted, the module will keep the 8 lines composition.
The virtual output module has the same working. A wired line can not be substituted with a wi-
reless one. The lines already existing in the control panel can not be replaced with wireless lines.
4.2 – Devices delete
To delete a device, select the Dev. delete item from the device menu, select the device to elimi-
nate and confirm.
All the devices of the wire radio interface can be deleted from the main menu with the "Delete
All" option.
4.3 - Options
Through this menu it is possible to check the software version and to set the supervision betwe-
en the interface and the device.
Supervision: time between two supervisions made by the interface; setting available: 5, 10, 20
and 60 MIN (default 60 MIN).
WL Version: displays the software version of the interface.
15
In the main menu you
can delete all the ra-
dio wire interface de-
vices using the "dele-
te all"