Setwidth; Setdensity; Setmargin; Setoffset - SATO PV3 Manual

Xamarin SDK

7-2-5 setWidth

Sets the print width.
[Syntax]
Task<int> setWidth(int labelWidth)
[Parameters]
• int labelWidth: print width
[Returns]
If the method succeeds, the return value is zero(0). Other cases, returns non-zero.

7-2-6 setDensity

Sets the print density.
[Syntax]
Task<int> setDensity(int density)
[Parameters]
• int density: print density (Range of 1 to 20)
[Returns]
If the method succeeds, the return value is zero(0). Other cases, returns non-zero.

7-2-7 setMargin

Sets the margins in the printing area.
[Syntax]
Task<int> setMargin(int horizontalMargin, int verticalMargin)
[Parameters]
• int horizontalMargin: Left margin
• int verticalMargin: Top margin
[Returns]
If the method succeeds, the return value is zero(0). Other cases, returns non-zero.

7-2-8 setOffset

Sets offset length between black mark(or gap) and dotted lines.
[Syntax]
Task<int> setOffset(int offset)
[Parameters]
• int offset: offset value (Range of -100 to 100)
[Returns]
If the method succeeds, the return value is zero(0). Other cases, returns non-zero.
Ver. 1.01
- 18 -