Configuring Your iBusiness Security Gateway Home-Office
Verifying Your Local Network Connection with the Device
To see if this Router is visible on
the local network, go to Start /
Run. In the Run dialog box, type
"ping
192.168.1.254"
presses OK.
A command prompt window will
pop out.
successful which means your
local network is able to reach to
the device, then the command
prompt window will close up
automatically.
Connection fails, when you see
"Request timed out" in the
command prompt window. You
may need to check your set up.
To configure this device, you must have IE 5.0 /
Netscape 4.5 or above installed
then
If your ping is
BiGuard 2 iBusiness Security Gateway Home-Office
9