Groen ECLIPSE BPM-30E Operators & Service Manual
  1. Manuals
  2. Brands
  3. Groen Manuals
  4. Commercial Food Equipment
  5. Eclipse BPM-30E
  6. Operators & service manual
Groen ECLIPSE BPM-30E Operators & Service Manual

Groen ECLIPSE BPM-30E Operators & Service Manual

Ergonomic tilting braising pan
Hide thumbs Also See for ECLIPSE BPM-30E:
Table of Contents

Advertisement

Quick Links

Download this manual
OPERATOR/SERVICE MANUAL
IMPORTANT INFORMATION, KEEP FOR OPERATOR
This manual provides information for:
MODELS
BPM-30/40E(CE)
ECLIPSE
™
TILTING BRAISING PAN
· Stainless Steel
· Manual Tilt
· Electric Heated
THIS MANUAL MUST BE RETAINED FOR FUTURE REFERENCE.
READ, UNDERSTAND AND FOLLOW THE INSTRUCTIONS AND
WARNINGS CONTAINED IN THIS MANUAL.
FOR YOUR SAFETY
Do not store or use gasoline or other flammable vapors
and liquids in the vicinity of this or any other appliance.
WARNING
Improper installation, adjustment, alteration, service or
maintenance can cause property damage, injury or death.
Read the installation, operating and maintenance instructions
thoroughly before installing or servicing this equipment.
NOTIFY CARRIER OF DAMAGE AT ONCE
It is the responsibility of the consignee to inspect the container upon receipt of
same and to determine the possibility of any damage, including concealed dam-
age. Unified Brands suggests that if you are suspicious of damage to make a
notation on the delivery receipt. It will be the responsibility of the consignee to file
a claim with the carrier. We recommend that you do so at once.
Manufacture Service/Questions 888-994-7636.
Information contained in this document is known to be current and accurate at the time
of printing/creation. Unified Brands recommends referencing our product line websites,
unifiedbrands.net, for the most updated product information and specifications.
PART NUMBER 153352, REV. A (3/07)
International
ERGONOMIC
1055 Mendell Davis Drive
Jackson, MS 39272
888-994-7636, fax 888-864-7636
groen.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ECLIPSE BPM-30E and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Groen ECLIPSE BPM-30E

Summary of Contents for Groen ECLIPSE BPM-30E

  • Page 1 Information contained in this document is known to be current and accurate at the time of printing/creation. Unified Brands recommends referencing our product line websites, unifiedbrands.net, for the most updated product information and specifications. 1055 Mendell Davis Drive Jackson, MS 39272 888-994-7636, fax 888-864-7636 groen.com PART NUMBER 153352, REV. A (3/07)
  • Page 2 HYDROXIDE OR THAT IS ALKALINE. WARNING: USE OF ANY REPLACEMENT PARTS OTHER THAN THOSE SUPPLIED BY GROEN OR THEIR AUTHORIZED DISTRIBUTOR VOIDS ALL WARRANTIES AND CAN RESULT IN BODILY INJURY TO THE OPERATOR AND DAMAGE THE EQUIPMENT. SERVICE BY OTHER THAN FACTORY-AUTHORIZED PERSONNEL WILL VOID ALL WARRANTIES.
  • Page 3 IMPORTANT — READ FIRST — IMPORTANT WARNING: AVOID ALL DIRECT CONTACT WITH HOT EQUIPMENT SURFACES. DIRECT SKIN CONTACT COULD RESULT IN SEVERE BURNS. WARNING: AVOID ALL DIRECT CONTACT WITH HOT FOOD OR WATER IN THE BRAISING PAN. DIRECT CONTACT COULD RESULT IN SEVERE BURNS. CAUTION: DO NOT OVER FILL THE BRAISING PAN WHEN COOKING, HOLDING OR CLEANING.

  • Page 4: Table Of Contents

    Table of Contents IMPORTANT OPERATOR WARNINGS (READ FIRST) ..........2 Table of Contents REFERENCES .

  • Page 5: Equipment Description

    OM-BMP-E OM-BPM-E Equipment Description The Groen BPM-E is a stainless steel, electrically This tilting mechanism is located in a stainless heated Braising Pan which is equipped with steel console to right of the pan body. To facilitate integrated heating elements, a hand operated or...
  • Page 6 Inspection & Unpacking The unit will arrive completely assembled, CAUTION wrapped in protective plastic on a heavy skid, in a SHIPPING STRAPS ARE UNDER TENSION heavycardboardcarton.Immediately upon receipt, AND CAN SNAP BACK WHEN CUT. inspect the carton for damage. Report any apparent shipping damage or an incorrect UNIT WEIGHS 420 TO 560 LB (190 TO 255 shipment to the delivery agent.

  • Page 7: Installation

    1. Installation WARNING THE BRAISING PAN MUST BE INSTALLED BY PERSONNEL WHO ARE QUALIFIED TO WORK WITH ELECTRICITY. IMPROPER INSTALLATION COULD RESULT IN PERSONAL INJURY OR EQUIPMENT DAMAGE. Internal wiring for the Braising Pan is supplied complete. When you receive the unit, it is ready for connection. A wiring schematic is located inside the control box on the right side of the pan, and in this manual.
  • Page 8 1.3 Electrical System Performance ELECTRICAL REQUIREMENTS Model BPM-30E (CE) BPM-40E (CE) 61.1 10.6 14.1 15.4 20.4 Cover Power Switch Indicator Light Cover Handle Thermostat Indicator Light Stainless Steel Console OM/SM-BPM-E CE...

  • Page 9: Assembly And Commissioning

    2. Assembly and Commissioning Electrical Supply 2.3.2 Checking Performance of Controls a) Heat the unit as described in Paragraph 2.3.1, Before commissioning the appliance, ensure that the above. Check that the amber heat neon is electrical installation has been performed in compliance glowing.

  • Page 10: Service

    Frequency of lubrication depends on operating conditions, but should occur at least once every six months. Groen recommends the use of a Number Two grade Fig. 2 LGI lithium grease. Add grease through the Zerk ttings on the gear housing until grease ows out Removal of Tilt Switch of the bearings around the trunnion shaft.
  • Page 11 Removal of Neons e) Remove four nuts which position the thermostat bulb cover in place. (See Fig. 2) (Turn electricity main o ) Remove thermostat bulb cover. a) Remove electrical cabinet top panel assembly and side panel as described in Paragraph 3.2. g) Remove fasteners retaining the thermostat capillary, bulb cover and insulated strip.
  • Page 12 3.7.1 To Reset 3.7.3 Check Operation a) Remove electrical cabinet top panel assembly and side Operation of the high limit thermostat must be panel as described in Paragraph 3.2. checked regularly. Use the following procedure: a) Remove the electrical cabinet top panel assembly and b) Push the reset button located on the high limit side panel as described in Paragraph 3.2.
  • Page 13 3.10 Fuse Replacement 3.7.4 Calibration a) Remove electrical cabinet top panel assembly and The high limit thermostat is of the xed type. Its side panel as described in Paragraph 3.2. calibration point may not be adjusted. b) Remove fuse from fuse holder. WARNING c) Replace fuse with an identical fuse.
  • Page 14 WIRING SCHEMATICS Model BPM-30E CE OM/SM-BPM-E CE...
  • Page 15 WIRING SCHEMATICS Model BPM-40E CE OM/SM-BPM-E CE 1...

  • Page 16: User Instructions

    4. User Instructions Heating and Operation c) Safety Features: a) Check that the electricity main is “ON”. • A high limit safety thermostat, which cuts o power to the heating elements if the b) Turn the toggle switch (Electrical Cabinet) to the operating thermostat fails (i.e., should the “ON”...
  • Page 17 Standing at one side of the pan to avoid the CAUTION steam that will be released, grasp the DO NOT OVERFILL THE BRAISING PAN nearest corner of the cover handle and raise WHEN COOKING, HOLDING OR the cover. The cover will stay in the open CLEANING.

  • Page 18: Cleaning

    5. Cleaning 1. Suggested Tools a. A good stainless steel cleaner b. Brushes in good condition CAUTION c. Cloth for cleaning controls MOST CLEANERS ARE HARMFUL TO THE d. Chlorine sanitizer SKIN, EYES, MUCOUS MEMBRANES, AND CLOTHING. PRECAUTIONS SHOULD BE e.
  • Page 19 OM-BPM-E e) Rinse the pan very well with lukewarm water, k) Following supplier instructions, apply the and drain it completely. sanitizing agent after the unit has been cleaned and drained. Thoroughly drain o the sanitizer. As part of the daily cleaning program, clean all inside and outside surfaces that may have been soiled.

  • Page 20: Maintenance

    ELECTRICAL POWER MUST BE SHUT OFF BEFORE WORK IS DONE ON INTERNAL COMPONENTS. WARNING USE OF ANY REPLACEMENT PARTS OTHER THAN THOSE SUPPLIED BY GROEN OR THEIR AUTHORIZED DISTRIBUTORS CAN CAUSE INJURY TO THE OPERATOR AND DAMAGE TO THE EQUIPMENT AND WILL VOID ALL WARRANTIES.

  • Page 21: Troubleshooting

    Groen Service Representative. For the phone number of the nearest agency, call your area Groen representative or the Groen Parts and Service Department. If an item on the list is followed by X , the work should only be performed by a quali ed service representative.

  • Page 22: Parts List

    OM-BMP-E PARTS LIST Stand and Food Assembly Stand and Foot Assembly Parts List STAND & FOOT ASSEMBLY Part # CASTER KIT (SET OF 2 WITH BRAKE AND 2 W/O BRAKE) 146354 CASTER WITH BRAKE (W/O FOOT ADAPTER) 146513 CASTER WITHOUT BRAKE (W/O FOOT ADAPTER)-NOT SHOWN 146515 FOOT ADAPTER 146516...
  • Page 23 PARTS LIST Cover and Counterbalance Assemblies Cover and Counterbalance Assemblies Parts List Qty COVER & COUNTERBALANCE ASSEMBLIES Part # COVER ASSEMBLY, 30 GALLON 160861 COVER ASSEMBLY, 40 GALLON 160808 COUNTERBALANCE ASSEMBLY, 30 GALLON 145480 COUNTERBALANCE ASSEMBLY, 40 GALLON 144790 STUD WELD, 1/4"-20 X 1-1/4" 012589 WASHER, LOCK 3/8"...
  • Page 24 PARTS LIST Pan and Element Cover Assembly (30 Gallon Shown) PAN & HEATING ELEMENTS ELEMENT COVER WELD ASSY., 30 GALLON 146186 ELEMENT COVER WELD ASSY., 40 GALLON 144343 " 4 NUT, HEXAGON KEPS 5/16"-18, 30 GALLON 012941 NUT, HEXAGON KEPS 5/16"-18, 40 GALLON 012941 WASHER, FLAT E (INSULATION)
  • Page 25 PARTS LIST Trunnion Covers 153243 TRUNNION COVERS MANUAL TILT RIGHT TRUNNION SIDE PANEL 145688 SCREW, 1/4-20 x 3/8" TRUSS 125609 TERMINAL BLOCK BOTTOM 146207 ELECTRICAL PANEL COVER ASSY. 153245 HOLE PLUG - 7/8” 147309 HOLE PLUG - 1 1/4” 147310 64 IN COVER GASKET (not shown) 145662 OM/SM-BPM-E CE ...
  • Page 26 PARTS LIST Electrical Control Components 10 10 10 10 18 22 22 23 23 19 20 32 31 30 29 28 26 27 26 14 10 OM/SM-BPM-E CE...
  • Page 27 PARTS LIST Electrical Control Components Continued ITEM NO. QTY. PART NUMBER DESCRIPTION 160804 ASSY, CONTROL PANEL BOX WELDMENT CE MARK BPM-30,40 G/E 077854 FUSE HOLDER TYPE 3 AG 009697 SCREW PAN HEAD #6-32 X 3/8" 077853 FUSE 3.0 AMP TYPE 3 AG 000453 BUSHING, SNAP 3/4 IN ID 1.3ft...
  • Page 28 OM-BPM-E OM-BPM-E PARTS LIST Manual Tilt Assembly Manual Tilt Assembly Manual Tilt Assembly Parts List Parts List MANUAL TILT ASSEMBLY MANUAL TILT ASSEMBLY KEY QTY KEY QTY Part No. Part No. GEAR CARRIER GEAR CARRIER 002624 002624 SHAFT, HANDWHEEL SHAFT, HANDWHEEL 144834 144834 GEAR, WORM...

  • Page 29: Service Log

    10. Service Log Model No. ___________________________ Purchased From _____________________ Serial No. ___________________________ Location ____________________________ Date Purchased ______________________ Date Installed ________________________ Purchase Order No. ___________________ For Service Call ______________________ Date Maintenance Performed Performed by OM/SM-BPM-E CE ...
  • Page 30 10. Service Log Model No. ___________________________ Purchased From _____________________ Serial No. ___________________________ Location ____________________________ Date Purchased ______________________ Date Installed ________________________ Purchase Order No. ___________________ For Service Call ______________________ Date Maintenance Performed Performed by OM/SM-BPM-E CE...

  • Page 31: Warranty

    Groen Foodservice Equipment ("Groen Equipment") has been skillfully manufactured, carefully inspected and packaged to meet rigid standards of excellence. Groen warrant their Equipment to be free from defects in material and workmanship for (12) twelve months, with the following conditions and subject to the following limitations.
  • Page 32 1055 Mendell Davis Drive • Jackson MS 39272 888-994-7636 • 601-372-3903 • Fax 888-864-7636 groen.com PART NUMBER 153352, REV. A (3/07)

This manual is also suitable for:

Eclipse bpm-40eEclipse bpm-30ceEclipse bpm-40ce

Table of Contents