Groen ECLIPSE BPM-30G Operators & Service Manual
  1. Manuals
  2. Brands
  3. Groen Manuals
  4. Commercial Food Equipment
  5. Eclipse BPM-30G
  6. Operators & service manual
Groen ECLIPSE BPM-30G Operators & Service Manual

Groen ECLIPSE BPM-30G Operators & Service Manual

Ergonomic tilting braising pan
Hide thumbs Also See for ECLIPSE BPM-30G:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Operator's Manual
OPERATOR/SERVICE MANUAL
IMPORTANT INFORMATION, KEEP FOR OPERATOR
This manual provides information for:
MODELS
BPM-30/40G(CE)
ECLIPSE
™
TILTING BRAISING PAN
· Stainless Steel
· Manual Tilt
· Gas Heated
T
H
S I
M
A
N
U
A
L
M
U
S
T
READ, UNDERSTAND AND FOLLOW THE INSTRUCTIONS AND
WARNINGS CONTAINED IN THIS MANUAL.
FOR YOUR SAFETY
Do not store or use gasoline or other flammable vapors
and liquids in the vicinity of this or any other appliance.
POST IN A PROMINENT LOCATION
Instructions to be followed in the event user smells gas.
This information shall be obtained by consulting your
local gas supplier. As a minimum, turn off the gas and
call your gas company and your authorized service agent.
Evacuate all personnel from the area.
WARNING
Improper installation, adjustment, alteration, service or
maintenance can cause property damage, injury or death.
Read the installation, operating and maintenance instructions
thoroughly before installing or servicing this equipment.
NOTIFY CARRIER OF DAMAGE AT ONCE
It is the responsibility of the consignee to inspect the container upon receipt of
same and to determine the possibility of any damage, including concealed dam-
age. Unified Brands suggests that if you are suspicious of damage to make a
notation on the delivery receipt. It will be the responsibility of the consignee to file
a claim with the carrier. We recommend that you do so at once.
Manufacture Service/Questions 888-994-7636.
Information contained in this document is known to be current and accurate at the time
of printing/creation. Unified Brands recommends referencing our product line websites,
unifiedbrands.net, for the most updated product information and specifications.
PART NUMBER 160812, REV. E (11/08)
PART NUMBER 160812, REV. C (06/07)
International
ERGONOMIC
B
E
R
E
T
A
N I
E
D
F
O
R
F
U
T
U
R
E
R
E
F
E
R
E
N
C
. E
1055 Mendell Davis Drive
Jackson, MS 39272
888-994-7636, fax 888-864-7636
groen.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ECLIPSE BPM-30G and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Groen ECLIPSE BPM-30G

Summary of Contents for Groen ECLIPSE BPM-30G

  • Page 1 Information contained in this document is known to be current and accurate at the time Jackson, MS 39272 of printing/creation. Unified Brands recommends referencing our product line websites, 888-994-7636, fax 888-864-7636 unifiedbrands.net, for the most updated product information and specifications. groen.com PART NUMBER 160812, REV. E (11/08) PART NUMBER 160812, REV. C (06/07)

  • Page 2: Important Operator Warnings (Read First)

    IMPORTANT — READ FIRST — IMPORTANT THESE APPLIANCES MUST BE INSTALLED BY A COMPETENT PERSON IN CONFORMITY WITH THE INSTALLATION AND SERVICING INSTRUCTIONS AND NATIONAL REGULATIONS IN FORCE AT THE TIME. PARTICULAR ATTENTION MUST BE PAID TO THE FOLLOWING: I. E. E. REGULATIONS FOR ELECTRICAL INSTALLATIONS ELECTRICITY AT WORK REGULATIONS GAS SAFETY (INSTALLATION &...
  • Page 3 TO VENT. FAILURE TO DISCONNECT COULD RESULT IN ELECTROCUTION AND DEATH. CAUTION: USE OF ANY REPLACEMENT PARTS OTHER THAN THOSE SUPPLIED BY GROEN OR AUTHORIZED DISTRIBUTORS CAN CAUSE INJURY TO THE OPERATOR AND DAMAGE TO THE EQUIPMENT AND WILL VOID ALL WARRANTIES.

  • Page 4: Table Of Contents

    Table of Contents IMPORTANT OPERATOR WARNINGS (READ FIRST) ..........2 REFERENCES .

  • Page 5: Equipment Description

    BPM-40G 1226 mm 1010 mm 1100 mm Groen™ Gas-Heated Eclipse™ Ergonomic Tilting The braising pan is mounted on an open-leg frame Braising Pans provide a stainless steel pan fabricated from tubular stainless steel. It has an equipped with patented heat transfer ignition system that uses electronic spark ignition.
  • Page 6 Inspection & Unpacking OM-BPM-G The unit will arrive completely assembled, Cut the straps holding the unit on the skid, and lift on a heavy skid, in a heavy cardboard carton. the unit straight up o the skid. Immediately upon receipt, inspect the carton for damage.

  • Page 7: Installation

    1. Installation The following information pertains to the CE model BPM-G, and replaces or augments the information provided in OM-BPM. These appliances must be installed by a competent person in conformity with the installation and servicing instructions and national regulations in force at the time. Particular attention must be paid to the following: I.
  • Page 8 Installing Clearances Ventilation Rate Required EQUIPMENT m³/min ft³/min Minimum Recommended Clearances Clearances Range, Unit Type Left Side 51mm (2”) for service, Pastry Oven 153mm (6”) when faucet is Fryer installed on left side Grill Right Side 305-405mm (12-16”), 153mm (6”) when faucet is Steak Grill installed on right side Boiling Pan...
  • Page 9 Use of the appliance with non-approved gases in a 1.4 Water Supply listed country, or use in other countries will void CE Not applicable to these appliances ezcept for certification. optional faucets.. 1.6 Burner Adjustment 1.5 Gas System Performance The burner primary airflow may be adjusted by The tables below provide the total Gas Rates, loosening the screw and sliding the aerator forward Injector Diameters and Pressure Adjustments for...

  • Page 10: Assembly And Commissioning

    2. Assembly and Commissioning Electrical Supply Before commissioning the appliance, ensure that the electrical installation has been performed in compliance with relevant regulations. See Paragraph 1.3, above. WARNING THIS APPLIANCE MUST BE EARTHED. Pre-Commissioning Check a) Remove literature and packing materials from the interior and exterior of the unit.
  • Page 11 d) Set the thermostat knob at “10" and allow the oil c) Light the burners as described in Paragraph to heat up. Immerse a thermometer or 2.3.1, above. thermocouple 25 mm below the oil surface at the center of the pan. Check that the temperature d) Manifold gas pressure should be as noted in Section 1.5 of the manual.

  • Page 12: Servicing And Conversion

    2. When any threaded gas connection is disturbed for any reason, the threads must be resealed with appropriate gas leak prevention sealant that is suitable for the type of gas. Unified Brands/ Groen recommends gas sealant compound such as Locktite® 243 or Unified Brands part number 122002.
  • Page 13 Removal of Control Panels 3.3.1 Removal of Electrical Panel Cover Assembly a) Remove the three screws which secure the lid to the control cabinet around its edge - 2 on sides, 1 on rear. b) Lift-up the lid, being careful to dislodge the 2 pins welded at lower edge of front end.
  • Page 14 c) Undo and remove the retaining collar which secures the On/Off switch to the outer surface of the control cabinet. d) Withdraw the On/Off switch from control compartment. WARNING e) Replace in reverse order. DO NOT OVERFILL WITH OIL OR FIRE MAY RESULT! Removal of Neons (Turn gas and...
  • Page 15 If the high limit thermostat switches, but not at the To Reset specified temperatures, the thermostat requires Remove the upper control box rear panel as replacement. Rejected thermostats must be described in 3.3.3. Push the reset button on logged and returned. the body of the high limit thermostat.
  • Page 16 3.13 Removal of Burner Orifices 3.14 Fuse Replacement (Injectors) (Turn gas and electricity a) Remove the control cabinet cover as described in Paragraph 3.3.1. mains off) a) Remove burners (Paragraph 3.11). b) Remove fuse from fuse holder (See Fig. 13). b) Remove orifices from burner manifold.

  • Page 17: User Instructions

    4. User Instructions Do not leave the braising pan unattended Lighting and Operation when heating. a) Check that gas and electricity mains are on. For frying, the depth of oil in the pan must never b) Turn the toggle switch (Main Control Box) to the exceed the maximum oil level mark on the inner “ON”...
  • Page 18 To Empty the Pan — A high limit safety thermostat which cuts off Turn the hand crank on the front of the cabinet the gas supply should the operating clockwise to tilt the pan body forward. The pan will thermostat fail (i.e., should the temperature exceed operating limits).

  • Page 19: Cleaning

    OM-BPM-G 5. Cleaning WARNING KEEP WATER AND SOLUTIONS OUT OF CONTROLS AND BURNERS. NEVER USE A HIGH PRESSURE SPRAY DIRECTLY ON THE CONTROL CONSOLE OR ANY ELECTRICAL CONNECTIONS. 1. Before any cleaning operation, shut o the burner 2. Clean all food-contact surfaces soon after use, by turning the thermostat dial to "0".

  • Page 20: Safety Precautions

    After installation, no user paragraph 3.1.2.b Gears). adjustment should be necessary. If a service need Groen recommends the use of number two grade LGI arises, only authorized personnel should perform the lithium grease. Add grease through the zerk ttings on work.

  • Page 21: Troubleshooting

    Groen Service Representative. For the phone number of the nearest agency, call your area Groen representative or the Groen Parts and Service Department. If an item on the list is followed by X , the work should only be performed by a quali ed service representative.
  • Page 22 Important: Service performed by other than factory authorized personnel will void all warranties. WHAT TO CHECK SYMPTOM X indicates items which must be performed by an Groen authorized service technician. Spark is present but the pilot Auth Service a. That the pilot valve is securely connected to terminals. X will not light.

  • Page 23: Parts List

    Stand and Foot Assembly Parts List STAND & FOOT ASSEMBLY CASTER KIT (SET OF 2 WITH BRAKE AND 2 W/O BRAKE) 146354 CASTER WITH BRAKE (W/O FOOT ADAPTER) 146513 CASTER WITHOUT BRAKE (W/O FOOT ADAPTER)-NOT SHOWN 146515 FOOT ADAPTER 146516 FLANGED FOOT (W/O FOOT ADAPTER) 146521 BULLET FOOT (W/O FOOT ADAPTER)
  • Page 24 Gas Piping Assemblies Parts List OM/SM-BPM-G...
  • Page 25 OM-BPM-G Gas Piping Assemblies Parts List GAS PIPING ASSEMBLIES KEY QTY PART NO# U BOLT 3/4 PIPE N87786 WASHER PLAIN 1/4 005472 NUT HEXAGON KEPS 1/4-20 WITH 012940 ELBOW 90 DEG 1/2 NPT 008747 NIPPLE 1/2 NPT X 11 005673 IGNITION MODULE PLATE ASSY-ELECTRONIC IGNITION 160775 SWIVEL JOINT 1/2 NPT (GAS)
  • Page 26 Combustion Chamber and Gas Manifold Assemblies Parts List OM/SM-BPM-G...
  • Page 27 Combustion Chamber and Gas Manifold Assemblies Parts List PART NO. KEY QTY COMBUSTION CHAMBER & GAS MANIFOLD ASSEMBLIES COMBUSTION CHAMBER ASSY, 30 GALLON 145941 COMBUSTION CHAMBER ASSY, 40 GALLON 144843 MANIFOLD, 30 GALLON 145944 MANIFOLD, 40 GALLON 144845 PILOT BURNER W/O PILOT ORIFICE, ELECTRONIC IGNITION ONLY 097024 PILOT ORIFICE, ELECTRONIC IGNITION-NATURAL GAS 119449...
  • Page 28 Electrical Control Components-Gas Parts List 12 13 10 11 21 11 16 18 OM/SM-BPM-G...
  • Page 29 Electrical Control Components-Gas Parts List OM-BPM-G OM-BPM-G ELECTRICAL CONTROL COMPONENTS-GAS KEY QTY PART # Electrical Control Components-Gas Parts List Electrical Control Components-Gas Parts List OM-BPM-G FUSE HOLDER MAIN CONTROLS-ELECTRONIC IGNITION ONLY 077854 Electrical Control Components-Gas Parts List FUSE -24VAC CONTROL, 3A, TYPE AG-ELECTRONIC IGNITION ONLY 077853 SCREW, ROUND HEAD #8-32 X 1-1/4"-ELECTRONIC IGNITION ONLY ELECTRICAL CONTROL COMPONENTS-GAS...
  • Page 30 Trunnion Cover Parts List OM/SM-BPM-G...
  • Page 31 OM-BPM-G OM-BPM-G Trunnion Cover Parts List TRUNNION COVERS KEY QTY MANUAL TILT ELECT. IGNITION THERMOSTAT BOX ASSEMBLY 146131 WASHER LOCK 1/4 005655 THERMOSTAT BOX SHELL 146132 COVER, CONTROL CONSOLE 146147 SHELL, BRACKET, THERMOSTAT BOX 146130 NUT DOME HIGH PROFILE - 1/4-20 090567 14 IN CONDUIT SEALTITE 3/8 054306...
  • Page 32 Manual Tilt Assembly Parts List MANUAL TILT ASSEMBLY KEY QTY PART NO. GEAR CARRIER 002624 SHAFT, HANDWHEEL 144834 GEAR, WORM 128001 GEAR SECTOR 009829 KEY GIB 012031 HANDWHEEL 012061 PIN ROLL 012614 SCREW SET SOCKET 012060 BEARING ROLLER 002790 BEARING SLEEVE 137239 PLUG PIPE 010286...
  • Page 33 Parts List - Fuel Gas Conversion (For conversion of a natural gas unit to propane or a propane model to natural gas) BPM WITH ELECTRONIC IGNITION DESCRIPTION NAT GAS LP GAS Pilot Ori ce 119449 098647 Burner Ori ce 128158 146148 Ignition Tube Ori ce 101622...
  • Page 34 Cover and Counterbalance Assemblies Parts List Qty COVER & COUNTERBALANCE ASSEMBLIES Part # COVER ASSEMBLY, 30 GALLON 160861 COVER ASSEMBLY, 40 GALLON 160808 COUNTERBALANCE ASSEMBLY, 30 GALLON 145480 COUNTERBALANCE ASSEMBLY, 40 GALLON 144790 STUD WELD, 1/4"-20 X 1-1/4" 012589 WASHER, LOCK 3/8" 005618 SCREW, HEX HEAD CAP 3/8"-16 X 1"...

  • Page 35: Service Log

    10. Service Log Model No. ___________________________ Purchased From _____________________ Serial No. ___________________________ Location ____________________________ Date Purchased ______________________ Date Installed ________________________ Purchase Order No. ___________________ For Service Call ______________________ Date Maintenance Performed Performed by OM/SM-BPM-G...
  • Page 36 1055 Mendell Davis Drive • Jackson MS 39272 888-994-7636 • 601-372-3903 • Fax 888-864-7636 groen.com PART NUMBER 160812, REV. E (11/08) PART NUMBER 160812, REV. C (06/07)

This manual is also suitable for:

Eclipse bpm-40g

Table of Contents