Extreme Networks AP510C Hardware User's Manual page 4

AP510C and AP510CX Hardware Guide
Once the bracket is secure, you can install the AP by aligning the red dot on the bracket with the red dot on the bottom of the AP. Keeping the
dots aligned, raise the AP up until the bracket fits into the circular depression in the bottom of the AP. When the AP is firmly seated, rotate it clock-
wise until it clicks in to place. The process is identical for both models.
Mount the AP on a Wall
Use the holes in the accessory wall-mount bracket as a template to mark the wall. Drill holes in the wall and attach the bracket to the wall using
wall screws and wall anchors if necessary. Attach the AP to the bracket in the same manner as shown in the previous section. Install external
antennas on AP510CX devices. Order antennas from Extreme Networks (AH-ACC-ANT-AX-KT).
Lock the AP
You can secure the AP using a Kensington
screw or a security screw. Security brackets and screws can be ordered separately from Extreme Networks (not available in Brazil).
Extreme Networks recommends a variety of Kensington locks. For more information, contact your sales representative.
AP510C and AP510CX Hardware Guide
®
lock in the lock slot on the side of the device, or you can use a security bracket and a crosshead
4
4