Using The Lcd Display - Bertazzoni FD30CON Installation, Use & Care Manual

A Touch control areas
C Upper cavity Touch control areas
E Lower cavity Temperature knob
G Upper cavity Temperature knob
START

USING THE LCD DISPLAY

DESIGN SERIES OVENS (CON MODELS)
PROFESSIONAL SERIES OVENS (PRO MODELS)
The LCD display can be operated 1 minute after the power supply is connected.
To activate the display:
DESIGN SERIES OVENS (CON MODELS)
Tap for 2 seconds any of the touch control areas (A). The following icons will
appear:
Timer
PROFESSIONAL SERIES OVENS (PRO MODELS)
Turn the cooking modes knob (right side). The following icons will appear:
Timer
Once activated each menu will show the icons necessary for navigation and
programming next to the touch control areas.
After 1 minute without operation the display will go in stand-by mode to reduce
power consumption and the touch control areas will turn off. Touch any control area
for 2 seconds to reactivate the display.
B LCD Display
D Lower cavity Touch control areas
F Lower cavity Cooking modes knob
H Upper cavity Cooking modes knob
Settings Light
Settings
20
Start