Using The Lcd Display - Bertazzoni F60CONXT Installation, Maintenance And User Manual

START
The LCD display can be operated 1 minute after
the power supply is connected.
To activate the display:
DESIGN SERIES OVENS (CON MODELS)
Tap for 2 seconds any of the touch control areas
(A). The following icons will appear:
Timer Settings
PROFESSIONAL SERIES OVENS (PRO MODELS)
Turn the cooking modes knob (right side). The
following icons will appear:
Timer Settings
Once activated each menu will show the icons
necessary for navigation and programming next
to the touch control areas.
After 1 minute without operation the display will
go in stand-by mode to reduce power
consumption and the touch control areas will
turn off. Touch any control area for 2 seconds to
reactivate the display.
6

USING THE LCD DISPLAY

Light Start
ICONS LEGEND
Timer
Light
Settings menu
Start
Scroll left/right and up/down
Confirm selection
Remove selection or leave menu
Stop cooking
Set cooking time, delay start/end time, food
probe
Modify cooking mode
Modify cooking temperature
SETTINGS
Activate SETTINGS menu with
Select field with
Set the desired values with
Leave menu
Notes
ECO mode: this setting reduces energy
consumption by:
– turning off the oven before the end of a
cooking program and using residual heat to
complete the cooking
– switching off the oven light during cooking
– switching off the display in stand-by mode.
Audio Level: Level 1 to 3. Level 1 is NO AUDIO
and confirm
and confirm