Setting Alarms - Roberts SOUND 48 Manual

Setting alarms

Your clock radio has 4 alarms which can be set to wake you by DAB, FM radio, USB,
CD or beep type alarm. Each alarm can be set to sound, weekdays, weekends,
everyday or once.
Note: The alarms can only be set with the clock radio in standby mode. Alarms will
be retained in the event of a power failure. If no buttons are pressed for 30 seconds,
the clock radio will exit the alarm setup.
1 When in standby mode, give a long press on the Alarm button.
2 Press the Preset/Album Up or Down buttons to select the desired alarm 1, 2, 3
or 4.
3 Press the Alarm button.
4 Press the Preset/Album Up or Down buttons to select the desired alarm mode.
Choose from OFF, BUZZER, DAB, USB, CD or FM mode. When the alarm mode
is set to 'OFF' the alarm will be disabled.
Press the Alarm button. The hour digits will flash on the display.
5
6 Press Preset/Album Up or Down buttons to select the alarm hour. Give a long
press on the Up or Down buttons to advance the time quickly.
7 Press Alarm. Press Preset/Album Up or Down buttons to select the desired
alarm minute.
Press Alarm to confirm and to enter the alarm day option menu.
8
9 Press Preset/Album Up or Down buttons to select the desired Alarm day option.
Choose from WEEKDAYS, WEEKENDS, EVERYDAY or ONCE. If you set the
alarm to ONCE you will also need to set the date.
10 Press Alarm to confirm the setting. When the clock radio is in standby the alarm
symbol will appear if an alarm is set.
• When the alarm is set to wake by radio the last used station will be used and the
alarm volume will be the previously listened to setting. The volume must not be
set at the lowest level. The alarm will sound for 90 minutes unless cancelled. If a
CD or USB is not present at the alarm time, the buzzer will be used instead.
19
40
DAB FM