Berkel 919E Specifications

Model 919E
C
Safety and Convenience Features
Berkel Model 919E automatic gravity feed slicer features
Berkel's time proven hollow ground stainless steel knife,
built-in, dual-action sharpener and a number of safety
features. The tapered permanent guard covers the non-
slicing portion of the knife even when the sharpener and
center plate are removed. The unit is easy to clean and
disassembles quickly without tools.
Accessories
Stainless steel vegetable
chute with pusher
Skewers with coring tool
Sharpening kit
Receiving tray
Approved By:
Date
Berkel Company • 4406 Technology Drive • South Bend, IN 46628-9700
574-232-8222 • 800-348-0251 • FAX 888-888-2838 • www.berkel.com
Form #SPC07-0902N
Item #
Model 919E
Automatic Gravity Feed Slicer
Standard Features
1-speed, 1/2 HP, totally enclosed and permanently
lubricated knife motor
1-speed, automatic carriage produces 50 slices per
minute
Furnished in 115/60/1, 4.5 amp, AC, ETL listed;
also available in 1/3 HP, 220/60/1, 2.4 amp, AC,
ETL Listed
Low 12/5 VDC voltage for added operator protection
Finish is stainless steel and sanitary burnished
aluminum; unit disassembles quickly without tools
for easy cleaning
Nominal 12-1/2" (318 mm) diameter, hollow ground,
hardened and polished forged stainless steel knife
The carriage handles food up to 11" (280 mm) wide,
by 6" (152 mm) high or 8" (203 mm) diameter
Rear-mounted, stainless steel meat pusher extends
over the length of the product table
Precise slice adjustment to a thickness of
27/32" (21 mm)
Ergonomic style handle for ease of use
Built-in, top-mounted, two stone knife sharpener
with single lever, dual-action system
Permanent, tapered knife ring guard covers non-
slicing portion of knife even when the sharpener
and center plate are removed
Q-P-Q nickel plated transport slide rod with reservoir
wick for reduced wear
On/off, 3-position, moisture protected switch with
4" Extension NSF
power light
legs (set of 4)
Attached 6-foot, flexible, 3-wire cord and plug for
grounded receptacle
Slaw tray
No-Volt release prevents activation of the slicer in
Juice cup
the event of a power interruption; operator must
Product fence
restart the slicer
Options
1/3 HP, 220/60/1, 2.4 amp, AC, ETL listed