Berkel 909E Owner's/Operator's Manual
  1. Manuals
  2. Brands
  3. Berkel Manuals
  4. Kitchen Appliances
  5. 909E
  6. Owner's/operator's manual

Berkel 909E Owner's/Operator's Manual

Berkel 909e slicers: operating instruction
Hide thumbs Also See for 909E:

Advertisement

Table of Contents

T
C
ABLE OF
ONTENTS
Page
General Safety Instructions .................................................................................................................. 2
Equipment Description ......................................................................................................................... 4
Installation ............................................................................................................................................ 6
Assembly .............................................................................................................................................. 7
Testing Prior to Operation .................................................................................................................... 8
Operating Instructions ........................................................................................................................ 10
Sharpener Maintenance ...................................................................................................................... 12
Cleaning and Sanitizing....................................................................................................................... 14
Sharpening .......................................................................................................................................... 17
Optional Accessories .......................................................................................................................... 18
Troubleshooting .................................................................................................................................. 20
Repair Parts/Repair Service ................................................................................................................ 20
Specifications ...................................................................................................................................... 20
Warranty ............................................................................................................................................. 21
The Berkel Company • World's Leading Manufacturer of Slicer and Food Processing Equipment
B
C
ERKEL
OMPANY
4406 Technology Drive · South Bend, Indiana 46628-9770
574/232-8222 · Fax 574/232-8116
(800) 348-0251
Form No. OM909/919E-0103N
Printed in USA
Berkel Company
Part No. 3175-00925
909E & 919E O
/O
M
• 1
WNER
PERATOR
ANUAL

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 909E and is the answer not in the manual?

Questions and answers

Related Manuals for Berkel 909E

Summary of Contents for Berkel 909E

  • Page 1: Table Of Contents

    Troubleshooting ... 20 Repair Parts/Repair Service ... 20 Specifications ... 20 Warranty ... 21 The Berkel Company • World’s Leading Manufacturer of Slicer and Food Processing Equipment ERKEL OMPANY 4406 Technology Drive · South Bend, Indiana 46628-9770 574/232-8222 · Fax 574/232-8116 (800) 348-0251 Form No.
  • Page 2 UTILIZE UNICAMENTE los repuestos provistos por el fabricante. EN CASO de que los membretes de ‘PELIGRO’ se desprendan de la mçquina o sean illegibles, llame al fabricante o a su representante de service Berkel para que lo reemplace sin cargo. 2 • 909E & 919E O WNER...
  • Page 3 USE ONLY the attachments provided by the manufacturer. SHOULD any warning label on a machine come off or become unreadable, contact the manufacturer or your Designated Berkel Service Location for a free replacement. WARNING SHARP KNIFE BLADE to avoid serious personal injury 909E &...

  • Page 4: Equipment Description

    Sharpener 4 • 909E & 919E O WNER PERATOR QUIPMENT ESCRIPTION Pusher Center Plate Slide Bar ANUAL Pusher Pusher Hooks...
  • Page 5 QUIPMENT Center Plate Locking Knob Slice Deflector ESCRIPTION Gauge Plate ON/OFF Switch Shift Lever 909E & 919E O Product Table Product Table Handle Thickness Control Knob • 5 WNER PERATOR ANUAL...

  • Page 6: Installation

    OPERATED ON SOLID LEVEL SUPPORT. Installation should be made by an authorized Designated Berkel Service Location (DBSL) who will demonstrate the slicer and register it for warranty. A list of DBSL’s can be found at www.berkel.com. DO NOT ACTIVATE BY WALL SWITCH.

  • Page 7: Assembly

    Pull the pusher gently up toward the upper end of the product table and lift free from the stop. Lower the pusher gently until it rests at the bottom of the product table. Put a few drops of the sample Berkel USDA-authorized food machine oil supplied with the slicer on the product pusher slide bar.

  • Page 8: Testing Prior To Operation

    ANUAL PERATION Note: Make sure on the Model 919E slicers that the shift lever is in the manual position. Turn the unit on by pushing the START switch up to its highest position, then release so that it goes back to the middle position. The knife will start slowly, then speed up.
  • Page 9 SLICER YOU SHOULD EVER TOUCH WHILE SLICING. Using the product table handle, slide the table back and forth. If there is any rough operation or obstruction, shut the machine off, unplug the power cord, and call your nearest Designated Berkel Service Location.
  • Page 10 The numbers on the knob will help you set the slicer to the thickness that’s “just right” for a product. The numbers and thickness may vary slightly from one machine to the next. If you’re 10 • 909E & 919E O WNER...
  • Page 11 AFTER EACH USE OF THE SLICER, TURN THE THICKNESS CONTROL KNOB FULL RIGHT. THIS PLACES THE GAUGE PLATE IN THE CLOSED POSITION AND COVERS THE KNIFE EDGE. 919E ODEL WARNING TABLE TO MOVE AUTOMATICALLY. WARNING 909E & 919E O WNER PERATOR • 11 ANUAL...
  • Page 12 Oil sharpener shafts. Place a few drops of Berkel oil on each shaft. Move the sharpening lever back and forth to make sure that the stones move in and out easily. Oil threads on sharpener cover locking knob and shaft.
  • Page 13 HARPENING Places the stones in a solution of soap and water and allow to soak for approximately one hour. Remove the stones from the solution and brush clean with a stiff bristle brush (Berkel P/N 4975- 09237). Rinse the stones with water and dab with a paper towel to remove excess moisture.

  • Page 14: Cleaning And Sanitizing

    Pull the deflector out at the bottom and down to release top pin, then lift deflector free. Clean and sanitize removed parts. Berkel recommends using USDA-approved sanitizer (P/N 4975- 00400). Wash these parts in hot water with detergent or put parts through dishwasher, rinse in hot water and rinse again in sanitizing solution.
  • Page 15 Clean the knife box ONLY with the cleaning brush supplied with the machine. Clean the back of the knife box area with the cleaning brush. Rinse with clean water, sanitize and allow to dry. Berkel recommends using USDA-approved sanitizer (P/N 4975-00400).

  • Page 16: Sharpening

    Replace product table. Hold the product table with both hands and carefully lower it in place. Tighten the locking knob. Oil pusher shaft. Move the pusher up and down and coat the rod with a thin film of Berkel USDA- authorized oil.
  • Page 17 Release the sharpener lever. 10. Turn the slicer OFF with right hand. 11. Return sharpener to storage position. 12. After sharpening, clean and sanitize slicer as described on Pages 14 through 16. WARNING 909E & 919E O • 17 WNER PERATOR ANUAL...
  • Page 18 The juice cup is designed to fit onto the back lip at the receiving area of the slicer where it will catch the juice (tomatoes, for example) while allowing the product to drop freely on the receiving area. 18 • 909E & 919E O WNER...

  • Page 19: Troubleshooting

    This should be checked only by your Designated Berkel Service Location. NOTE: The mechanism in the undercarriage should not be oiled or greased except by a Designated Berkel Service Location. Excess oil can lead to wear, breakage and slippage of the drive belt and cause you needless expense.

  • Page 20: Repair Parts/Repair Service

    EPAIR Please contact your Designated Berkel Service Location (DBSL) for any repair parts and/or repair service required on your Berkel slicer. To find the DBSL nearest to you, visit www.berkel.com. Additional information may be obtained from: Service Support Center Berkel Company...

  • Page 21: Warranty

    These warranties are given only to the first purchaser from a Berkel Authorized Channel of Distribution. No warranty is given to subsequent transferees. The foregoing warranty provisions are a complete and exclusive statement of the warranty between the buyer and seller.

  • Page 22: Before Using This Equipment

    EFORE SING QUIPMENT Berkel’s slicers are designed to slice meat and other food products safely and efficiently. However, unless the operator is properly trained and supervised, there is the possibility of a serious injury. It is the responsi- bility of the owner to ensure that this slicer is used properly and safely, strictly following the instructions contained in this manual and any re- quirements of local law.
  • Page 23 WNER PERATOR ANUAL ODELS 909E & 919E LICERS IMPORTANT NOTICE This manual contains Important Safety Instructions which must be strictly fol- lowed when using this equipment. 909E & 919E O WNER PERATOR • 23 ANUAL...

This manual is also suitable for:

919e

Table of Contents