Conair 18 Series User Manual page 146

1 2 . Tr a n s p o r t , l i f t i n g a n d s t o r a g e
( c o n t i n u e d )
Lift the machine with care and in the way shown in this section.
Machine with uninstalled hopper or inlet part
The granulator can because of way of transport be delivered with the hopper or
front inlet part uninstalled.
On top of the hopper or top of the front inlet part there is in this case eyebolts fit-
ted which are intended for lifting with lifting straps.
Use these eyebolts only to lift the hopper or the front inlet part.
NOTE: A complete machine must never be lifted by using the eyebolts and lifting
straps on the hopper or front inlet part!
Positioning and installation in place of use
See Installation, section 5.
The fork positions
during lifting
(continued)
Tr a n s p o r t , L i f t i n g , a n d S t o r a g e l 1 2 - 3