Belkin F1DN002MOD-KM-4 Quick Installation Manual

Quick Installation Guide
2/4 Port Modular Secure KM Switches
Objectives
• Scan the QR code or visit Belkin Cybersecurity YouTube Playlist for Secure KVM Unboxing and Troubleshooting videos.
• This guide includes instructions for installing Belkin Modular Secure KM Switches. A modular secure KM will need to be connected by cables
designed to support USB keyboard and mouse to host computers. The unit is shipped with all connection cables required. Confirm they are with
the unit. Without the correct cables, the modular secure KM cannot be made operational.
• A modular KM allows sharing a keyboard and a mouse between multiple computers by navigating to each host computers video display(s) via mouse and keyboard.
• This Manual and additional product documentation is available for online download on Belkin website. For further assistance please refer to: http://www.belkin.com/
us/Resource-Center/Cybersecurity/Secure-KVM-Switching/.
General
• Verify that all peripherals and computers are turned OFF prior to
connecting them to the product.
• Verify that you have the correct modular cables for your install.
• The KM's back panel is divided into sections for Computer Ports.
– Using proper mounts and mounting techniques, secure the unit to its
mount (optional equipment)
– Connect the provided optional remote control to the front panel via
the supplied cable (if required).
– Connect each computer that needs access to shared peripherals to a
F1DN004MOD-KM-4 Model is shown
Connect peripherals to the KM

Console Ports:
• Keyboard & Mouse: Connect a USB keyboard
and mouse to the corresponding USB ports
on the front panel. The Keyboard and mouse
connected lights (top panel) will illuminate
green. If the keyboard or mouse are not
authorized, the lights will illuminate red.
Connect computers to the KM

Computer ports:
• Computer keyboard & mouse connection:
Connect each computer to the KM keyboard
& mouse computer port using modular host
cable, connect the USB A end to the computer.
 Mounting Options and Remote Control:
The modular secure KM is very small in
footprint. As such it is highly suggested that
the unit be mounted in a convenient location at
the desktop using one of the optional mounts
provided by Belkin. Each mounting option
has been designed to facilitate a position on
or near the desktop. See the Belkin web site
or contact your Belkin representative for a
full understanding of the multiple options,
which include an on desk/under desk mount,
a VESA back of the monitor mount, as well as
F1DN002MOD-KM-4: Belkin 2-Port Modular Secure Desktop KM Switch, PP4.0
F1DN004MOD-KM-4: Belkin 4-Port Modular Secure Desktop KM Switch, PP4.0
X 4
a monitor stand with an optional mount for
the KM.
• Installation:
– Choose the mount
– Install the modular KM unit with it's
modular cables to the mount
– Install the remote control (if applicable) on
the desktop near the mouse with enough
cable loop to provide easy access and
movement for the operator.
specific Computer Ports section via the supplied modular cable USB
type A.
– Make sure that every computer is connected to a separate Computer
Port section.
– The push buttons on the product's top panel indicate which computer
has currently access to shared peripherals.
– To switch peripherals between computers, press the KM hot key
(default "left crtl") on the keyboard and move the mouse to the
computer to be active, or push the appropriate button on the
product's top panel, or use the channel buttons on the remote control.
Source PC
X 4
Source Ports
NOTE: when using the remote control, the
top panel buttons are disabled.
– The default monitor configuration, as
well as a set of available configurations
by model is outlined in the modular KM
user manual. Contact your admin for user
manual details.
– Connect per section 1 and 2.
– Contact your Admin for any custom KM
configuration.
8820-02950 Rev.E00