Printer Setup - A&D RA3100 Omniace Instruction Manual

8.1.4.

Printer Setup

Tap Printer in the recording settings to configure the various print functions for printer output.
Printing Setup
Tap Printing to configure the various information printed at the same time as the waveform.
Header: This product prints the header Text/CH name before printing the waveform.
Select
before the waveform.
Annotation: Enables or disables the printing of annotation text to print at the same time as the
waveform.
Select
Footer: Select
after waveform recording ends.
Grid: Selects the grid pattern to print with the waveform.
Select
10 mm STD
1WMPD4004444
Text , CH name ,
Text or OFF .
Text , Scale value ,
10 mm STD , 10 mm ,
10 mm
8.Setup Details - 8.1.Recording Setup
Text/CH name , or OFF
Text/Scale value , or
5 mm STD , 5 mm , or
5 mm STD
81
as the information to print
OFF as the footer text to print
OFF .
5 mm OFF