Life; Platen Roller Maintenance; Power Outages; Battery Replacement - A&D RA3100 Omniace Instruction Manual

Hide thumbs Also See for RA3100 Omniace:
Table of Contents

Advertisement

11.Maintenance -11.4.Thermal Head Cleaning/Life

11.4.2. Life

The wear resistance of the thermal head is about 30 km (approximately 1,000 rolls of YPS106 recording
paper) or about 30 million printing pulses. Recording quality may not be able to be maintained after that. In
this case, please contact our sales representative to replace the thermal head (at an extra cost).
11.5.

Platen Roller Maintenance

Foreign material or dust adhering to the platen roller may cause damage to the thermal head or may
cause printing to become unclear and reduce the image quality. In this case, gently wipe the platen
roller clean using gauze dampened with ethanol.
11.6.

Power Outages

If a power outage occurs or the power cable becomes disconnected during recording, the internal SSD
may become damaged and unable to be accessed. An UPS(uninterruptible power supply) is
recommended to be used.
11.7.

Battery Replacement

The life of the backup battery for the internal clock is about 10 years (at 23°C). If the clock resets every
time the power is turned on, the battery may need to be replaced.
In this case, please contact our sales representative.
11.8.

Fan Replacement

If the internal fan stops due to failure, the internal temperature of the product will rise and may cause
damage to other devices inside the product. The state of the fan can be checked in
[Maintenance] screen.
If an error occurs, please contact our sales representative for a repair.
11.9.

Cautions for Disposing This Product

Take care of the following when disposing of this product.
This product includes a coin lithium battery (primary cell) for backup purposes.
When disposing of this product, make sure to remove the battery.
Do not dispose of the battery in fire or disassemble.
The battery may explode when it is heated and organic electrolyte that may exude from it is harmful to
human skin.
When disposing of the battery, isolate the terminals by covering with tape and dispose the battery as a
dangerous article.
This product uses a liquid crystal display.
The disposal of liquid crystal displays may be regulated by local government.
Follow the local regulations when disposing of it.
WARNING
140
Fan
on the
1WMPD4004444

Advertisement

Table of Contents
loading

Table of Contents