Omron 1S Series Instruction Manual page 37

 400-VAC Input Model: R88D-1SANF-ECT
Item
Rated voltage
Power supply frequency
Rated input current
Rated output current (FLA)
Short-circuit current rating (SCCR) ---
 Control Circuit Power Supply
Rating 24 VDC/1.2 A
Control Circuit Overcurrent Protection is required.
 Terminal Block Wire Sizes
The following tables show the rated current that flows to the terminal block on the Servo Drive
and the applicable wire sizes.
Use 75°C Copper Conductors only.
 Wire Sizes for 200-VAC Input Model: R88D-1SANH-ECT
Item
Power supply capacity
Main circuit power
*1
supply input
Motor connection
terminals
Protective
earth
*1. For single-phase inputs, connect between any two phases out of the following: L1, L2, and L3.
*2. The first value is for single-phase input power and the second value is for 3-phase input power.
 Wire Sizes for 200-VAC Input Model: R88D-1SANH-ECT
Item
Power supply capacity
Main circuit power
*1
supply input
Motor connection
terminals
Protective
earth
*1. For single-phase inputs, connect between any two phases out of the following: L1, L2, and L3.
*2. The first value is for single-phase input power and the second value is for 3-phase input power.
AC Servomotors/Servo Drives 1S-series Instruction Manual
Unit
VAC
Hz
Arms
Arms
Rated current
Wire size
Rated current
Wire size
Wire size
Screw size
Tightening torque Lb·in
Rated current
Wire size
Rated current
Wire size
Wire size
Screw size
Tightening torque Lb·in
10F-ECT
380Y/219-480Y/277
3-phase
50/60
3.1
4.1
480 V 5,000 Arms
Unit
02H-ECT
kVA 0.6
*2
Arms 2.7/1.5
--- AWG14
Arms 1.5
--- AWG14
--- AWG12 or larger
--- M4
10.7
Unit
10H-ECT
kVA 2.0
Arms 5.8
--- AWG14
Arms 7.7
--- AWG14
--- AWG12 or larger
--- M4
10.7
Model (R88D-1SAN)
15F-ECT 20F-ECT
4.3 6.5
4.7 7.8
Model (R88D-1SAN)
04H-ECT
1.0
*2
4.6/2.7
2.5
Model (R88D-1SAN)
15H-ECT 20H-ECT
2.5 3.6
*2
15.7/9.0 13.0
AWG12 to 8
9.7 16.2
AWG14 to 8 AWG10 to 8
30F-ECT
8.4
11.3
08H-ECT
1.4
*2
7.3/4.0
4.6
30H-ECT
4.7
15.9
22.3
36