Omron 1S Series Instruction Manual page 12

General Specifications for Servo Drives
Operating ambient temperature and humidity 0 to 55°C, 90% max. (with no condensation)
Storage ambient temperature and humidity
Operating and storage atmosphere
Operating altitude
Vibration resistance
Insulation resistance
Dielectric strength
Protective structure
EMC Directives
Low Voltage Directive
Machinery Directive
UL standards
CSA standards
Note: 1. The above items reflect individual evaluation testing.
The results may differ under compound conditions.
2. Disconnect all connections to the Servo Drive before attempting a megger test (insulation re-
sistance measurement) on a Servo Drive. Not doing so may result in the Servo Drive failure.
Do not perform a dielectric strength test on the Servo Drive. Internal elements may be dam-
aged.
 Servo Drive Rating
 200-VAC Input Model: R88D-1SANH-ECT
Item
Rated voltage
Power supply frequency
Single-phase
Rated input
current
3-phase
Rated output
Rated output current (FLA)
Weight
11
Item
Unit
VAC
Hz
Arms 2.7
Arms 1.5
W
Arms 1.5
kg
AC Servomotors/Servo Drives 1S-series Instruction Manual
-20 to 65°C, 90% max. (with no condensation)
No corrosive gases
1,000 m max.
10 to 60 Hz and at an acceleration of 5.88 m/s
or less (Not to be run continuously at the reso-
nance frequency)
Between power supply terminals/power termi-
nals and PE terminals: 0.5 MΩ min. (at 500
VDC)
Between power supply terminals/power termi-
nals and PE terminals: 1,500 VAC for 1 min at
50/60 Hz
IP20 (Built into IP54 panel)
EN 61800-3 second environment, C3 category
(EN 61000-6-7: Functional Safety)
EN 61800-5-1
EN ISO 13849-1 PLe/Cat.3
EN 61508 SIL3
EN 62061 SIL CL3
EN 61800-5-2 SIL3 (STO/SS1/SS2/SOS/SLS/
SLP/SDI/SBC)
UL61800-5-1
CSA C22.2 No.274
Model (R88D-1SAN)
02H-ECT
200 to 240 (170 to 252)
Single-phase/3-phase
50/60 (47.5 to 63)
200
2.6
Specifications
04H-ECT
*1
*1
4.6
2.7
400
2.5
2.6
2
08H-ECT
7.3
4.0
750
4.6
2.6