TLC SPRAY CABINET 2 Table of content Introduction / Precautions / Setting up Function of the Spray Cabinet 2 Precautions Setting up of the instrument Parts supplied Options Installation Installation of the instrument Preparation of the instrument Spraying a TLC Plate...
Use spare parts and consumables supplied by CAMAG only. The warranty is voided if parts from other sources are used. Check the service manual before you start service to reduce product-specific risks •...
TLC SPRAY CABINET 2 • If liquids penetrate the inside of the instrument, the pow- er has to be disconnected immediately. Small amounts of liquid can be wiped off and/or dried by means of a hair- dryer, with larger amounts of liquid a service technician has to be called.
TLC SPRAY CABINET 2 ⇒ perforated plate support (5) which is fixed in the upright position by the 3 rests of the tray ⇒ pins (6) which can be inserted into every hole of the perfo- rated plate support. This allows every plate size to be po- sitioned optimally for ' spraying.
Switch on the fan using the switch on the side of the hous- ing (gentle sucking noise). The green Pilot lamp burns as long as the fan blows. The TLC Spray Cabinet 2 is now ready to be used for spray- ing. 2.3 Spraying a TLC Plate Spray your TLC plate according to the instructions for your sprayer or as your own experience shows.
Need help?
Do you have a question about the TLC SPRAY CABINET 2 and is the answer not in the manual?
Questions and answers