Seneca S117P1 Installation Manual

Asynchronous serial converter rs232 / usb, ttl / usb and rs485 / usb

Hide thumbs Also See for S117P1:

Table of Contents

Download this manual

INSTALLATION MANUAL

S117P1

Asynchronous serial converter RS232 / USB, TTL / USB

and RS485 / USB

SENECA s.r.l.

Via Austria, 26 – 35127 – PADOVA – ITALY

Tel. +39.049.8705355 - 8705359 - Fax +39.049.8706287

For manuals in other languages and configuration software, visit:

www.seneca.it/products/s117p1

MI00235-5-EN

1/4

Table of Contents

Need help?

Do you have a question about the S117P1 and is the answer not in the manual?

Page 1 INSTALLATION MANUAL S117P1 Asynchronous serial converter RS232 / USB, TTL / USB and RS485 / USB SENECA s.r.l. Via Austria, 26 – 35127 – PADOVA – ITALY Tel. +39.049.8705355 - 8705359 - Fax +39.049.8706287 For manuals in other languages and configuration software, visit: www.seneca.it/products/s117p1...
Page 2 PRODUCT DESCRIPTION The S117P1 product is a converter capable of realizing an asynchronous RS232 serial, an RS485 serial or a TTL, using a USB port on the PC. Thanks to the driver provided, the serial interface is treated by the operating system as a standard system serial port, allowing the use of the product directly through any software capable of communicating with the standard serial ports provided by the operating system (COM1, COM2, etc).
Page 3 • RS232 serial communication. • RS485 serial communication, 32 nodes maximum. • Possibility of multiple connection of several S117P1 units on the same PC. • Three LEDs to display the status of the instrument's activity. • RS232 connections: DB9 connector •...
Page 4 1200 bps,115200 bps. INSTALLATION REGULATIONS As regards the S117P1 instrument, there are no particular precautions to follow, except that of using a shielded cable for the RS232 and RS485 lines for long connections or connections in noisy environments. TERMINAL POSITION AND DESCRIPTION...