Advertisement
3. KGE12EA/KGE13EA ELECTRICAL WIRING DIAGRAM
2. PREPARATORY STEPS FOR OPERATION
1. Environmental Requirements
1-1 Outdoors use
1) Install gasoline generator in a dry and dustless place.
2) Avoid the direct sunshine, place gasoline Generator in shade.
1-2 Indoor use
1) Use in well-ventilated areas, or vent exhaust outside and away from any
building air intakes. A large volume of air is required for the operation.
2) Keep the air inlet/outlet and the exhaust gas outlet 1.5m away from any
obstacle.
3) Use under 40 degrees temperature.
4) Install Generator on a lever surface.
2. Preparation for the engine
2-1 Initial start check
Check the each part of the generator before starting.
Keep away the fuel, matches, gunpowder, fuel wetting rags, hay and other
inflammable and explosive goods from the generator.
Make sure that nobody near the generator is warned, before starting the gasoline
generator.
Don't operate the generator set with wet hand or in rain, otherwise it will cause
serious electric shock accident.
Be care of these parts in the generator, such as rotary parts, hot parts, high-
voltage parts.
3. Initial start check
DANGER
The rotary parts are dangerous!
The high-speed rotating parts are very dangerous when the generator is running.
Service the unit after its engine stops completely.
Check the following items for the initial start:
1) Check and refill oil
Please use the CD grade(above) or SAE 10W-30 15W-40 lubrication oil.
CAUTION
Fill the lubrication oil between the two scales, don't beyond the upper limit. If the
lube spurts from the vent hole, it may cause the engine fault.
-6-
-
-
Hide quick links:
Advertisement
