Safety; Safety Definitions; General Safety Instructions; Special Safety Instructions - Husqvarna K 535i Workshop Manual

Hide thumbs Also See for K 535i:
Table of Contents

Advertisement

2.1 Safety definitions

Warnings, cautions and notes are used to point out
specially important parts of the manual.
WARNING: Used if there is a risk of injury or
death for the operator or bystanders if the
instructions in the manual are not obeyed.
CAUTION: Used if there is a risk of damage to
the product, other materials or the adjacent area
if the instructions in the manual are not obeyed.
Note: Used to give more information that is necessary in
a given situation.

2.2 General safety instructions

WARNING: Read the warning instructions that
follow before you use the product.
The service center that repairs the product must have
safety devices that obey local regulations. Warnings and
cautions are used to point out specially important parts
of the workshop manual.

2.3 Special safety instructions

Apply a new warning label if a warning symbol on
the product is damaged or missing.
Do not use accessories or spare parts that are not
approved by the manufacturer. Do not do changes
that are not approved by the manufacturer. This can
cause injury or death to the operator or other
persons.
Use protective gloves and eye protection. Approved
protective goggles must agree with the ANSI Z87.1
standard in the USA or EN 166 in EU countries.
When you use compressed air, do not point the
airflow in the direction of your body. Air can go into
the blood circulation and kill you.
Use approved hearing protection. Noise from the
product can result in permanent hearing loss.
The product can cause sparks. Do not operate the
product near flammable materials.
2.3.1 To remove the battery
WARNING: Always remove the battery before
you do repairs or do servicing on the product.

4 - Safety

2 Safety
WARNING: Do not put the battery back until the
product is assembled.
1. Press in the catches (1) and remove the battery (2).

2.4 Symbols on the product

Start/Stop
savE / Battery save mode
Warning lamp/Fault indicator
Read the manual carefully and make sure
you understand the instructions before
using the product.
Always put on personal protective
equipment:
WARNING! Kickbacks can be sudden,
fast and can cause injuries. Read and
understand the instructions in the manual
before using the product.
WARNING! Dust from cutting can cause
breathing problems. Use breathing
protection. Do not breathe exhaust fumes.
Always make sure there is good airflow.
WARNING! Sparks from the cutting blade
can cause a fire in materials such as,
gasoline, wood, fabric and dry grass.
WARNING! Do not use circular saw
blades.
Make sure the cutting disc is not
damaged.
1
2
1
744 - 002 -

Advertisement

Table of Contents
loading

Table of Contents