Pulleys; Motor - Husqvarna K 535i Workshop Manual

Hide thumbs Also See for K 535i:
Table of Contents

Advertisement

3. Turn the front pulley clockwise with the combination
wrench. At the same time, push the drive belt onto
the pulley.
4. Attach the belt cover.

6.10 Pulleys

6.10.1 To remove the motor pulley
1. Remove the belt cover and the drive belt. Refer to
To remove the drive belt on page 14 .
2. Lock the pulley with a combination wrench (A). Refer
to
Servicing tools overview on page 7 .
3. Loosen the bolt with a 13 mm wrench (B).
744 - 002 -
A
B
6.10.2 To remove the blade shaft pulley
1. Remove the drive belt. Refer to
belt on page 14 .
2. Lock the blade shaft with the spindle lock button (A)
and loosen the pulley screw (B) with the combination
wrench.
A

6.11 Motor

6.11.1 To disassemble the motor
1. Remove the handle half. Refer to
the handle half on page 10 .
2. Remove the drive belt. Refer to
belt on page 14 .
3. Remove the motor pulley. Refer to
motor pulley on page 15 .
4. Remove the connector.
To remove the drive
B
To disassemble
To remove the drive
To remove the
Repair instructions - 15

Advertisement

Table of Contents
loading

Table of Contents