Table of Contents
Advertisement
Available languages
Available languages
3
System description
3.1
Device
The photometers of the PCE-CP series are suitable for the determination of water quality on the
basis of up to thirteen different parameters. The field of application ranges from maintenance and
servicing of pool systems to more complex series of measurements in a laboratory environment.
For the latter, the automatic storage of measured values which can be read out and documented
via a Bluetooth interface using the provided software or app is of particular interest. In order to
ensure a correct and error-free measuring procedure, the photometers are equipped with a timer
which ensures that the reaction times of the reagents are met before the measurement.
The unit in which the measured values (except pH, alkalinity, total hardness and calcium
hardness) are displayed can be switched between mg/l and ppm. The unit in which alkalinity, total
hardness and calcium hardness are displayed can be selected from five different options.
1.
Light protection cover / measuring chamber
2.
Display
3.
Membrane keypad
© PCE Instruments
23
Advertisement
Table of Contents
