General Safety Warnings - Cisco Catalyst 8500 Series Hardware Installation Manual

Preparing Your Site for Installation

General Safety Warnings

Warning Read the installation instructions before using, installing or connecting the system to the power source.
Warning Ultimate disposal of this product should be handled according to all national laws and regulations.
Warning No serviceable parts inside. To avoid risk of electric shock, do not open.
Warning
To reduce risk of electric shock or fire, installation of the equipment must comply with local and national
electrical codes.
Warning Only trained and qualified personnel should be allowed to install, replace, or service this equipment.
Warning Statement 1005 Circuit Breaker
This product relies on the building's installation for short-circuit (overcurrent) protection. Ensure that the
protective device is rated not greater than:
AC:
• 20 A U.S. maximum
DC:
• 30 A U.S maximum
Warning This product requires short-circuit (overcurrent) protection to be provided as part of the building installation.
Install only in accordance with national and local wiring regulations.
Warning
This unit might have more than one power supply connection. To reduce risk of electric shock, all connections
must be removed to de-energize the unit.
Warning This unit is intended for installation in restricted access areas. A restricted access area can be accessed by
skilled, instructed or qualified personnel.
Cisco Catalyst 8500 Series Edge Platforms Hardware Installation Guide
General Safety Warnings
13