Whalen WSUC-4C Instruction Manual

Upper cabinet w/shelves

Advertisement

Quick Links

Upper Cabinet w/Shelves
Dark Cherry finish
WSUC-4C
WSUC-4W White finish
ADULT ASSEMBLY REQUIRED DUE TO THE PRESENCE OF SMALL PARTS, SHARP
POINTS, SHARP EDGES AS RECEIVED
1-866-942-5362
Please call for replacement parts or assistance:
Pacific Standard Time: 8:30 a.m. – 4:30 p.m. Monday to Friday
Or visit our web site www.whalenstorage.com
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION.
PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Whalen Storage
Factory No.: 15294
Page #1 of 11

Advertisement

Table of Contents
loading

Summary of Contents for Whalen WSUC-4C

  • Page 1 Upper Cabinet w/Shelves Dark Cherry finish WSUC-4C WSUC-4W White finish ADULT ASSEMBLY REQUIRED DUE TO THE PRESENCE OF SMALL PARTS, SHARP POINTS, SHARP EDGES AS RECEIVED 1-866-942-5362 Please call for replacement parts or assistance: Pacific Standard Time: 8:30 a.m. – 4:30 p.m. Monday to Friday Or visit our web site www.whalenstorage.com...
  • Page 2 Use of tip-over restraints may only reduce, but not eliminate, the risk of tip-over. This is a permanent label. Do not attempt to remove! 1-866-942-5362 Please call for replacement parts or assistance: Whalen Storage Factory No.: 15294 Page #2 of 11...
  • Page 3: Assembly Tips

    To avoid damage, assemble the unit on a sturdy, level and non-abrasive surface. Please wait until all steps are completed before tightening bolts. Make sure all bolts are tightly fastened before the unit is used. 1-866-942-5362 Please call for replacement parts or assistance: Whalen Storage Factory No.: 15294 Page #3 of 11...
  • Page 4: Parts List

    5- Side Panel Right (x 1) 6- Adjustable Shelf (x 2) 7- Bottom Panel (x 1) 8- Back Panel (x 1) 9- Lower Front Molding (x 1) 1-866-942-5362 Please call for replacement parts or assistance: Whalen Storage Factory No.: 15294 Page #4 of 11...
  • Page 5: Hardware List

    K- Plastic Cover (x 4) L- M6 x 25 mm Dowel (x 3) M- Floor Protector (x 4) Tools required: Rubber mallet, Phillips screwdriver (not provided) 1-866-942-5362 Please call for replacement parts or assistance: Whalen Storage Factory No.: 15294 Page #5 of 11...
  • Page 6 M8 x 30 mm Dowel (C) into the end holes as a guide, attach both Bottom Panel (7) and Stretcher (3) to the Side Panel Left (4) by engaging Cam Locks (A). 3. Repeat last step with Side Panel Right (5). 1-866-942-5362 Please call for replacement parts or assistance: Whalen Storage Factory No.: 15294 Page #6 of 11...
  • Page 7 Connectors (D). Fasten each Plastic Connector (D) by screwing two #8 x 13mm Screws (E) into the pilot holes. Screw 6 Cam Bolts (B) all the way into the pre-drilled small holes of Top Panel (1) as shown below. 1-866-942-5362 Please call for replacement parts or assistance: Whalen Storage Factory No.: 15294 Page #7 of 11...
  • Page 8 Attach the Back Panel in place by using #4 x 19 mm Screws (H) through the pre-drilled holes of Back Panel. 1-866-942-5362 Please call for replacement parts or assistance: Whalen Storage Factory No.: 15294 Page #8 of 11...
  • Page 9 10. Gently tap the Floor Protectors (M) at the bottom of side panels avoiding crack or damage of side panel. If you plan to use this unit as a hutch (stand this on another unit), please skip this step. 1-866-942-5362 Please call for replacement parts or assistance: Whalen Storage Factory No.: 15294 Page #9 of 11...
  • Page 10: Tipping Restraint Hardware

    Note: You must install the Tipping Restraint Hardware with the unit in use to prevent any accidents or damage to the unit. Tools Required: Phillips Screwdriver, Mallet, Power Drill, and 3/8” Drill Bit. 1-866-942-5362 Please call for replacement parts or assistance: Whalen Storage Factory No.: 15294 Page #10 of 11...
  • Page 11: Care And Maintenance

    This Whalen Storage product (exclusive of shelves) is warranted to the original purchaser. If there is a failure in this unit due to defects in materials or workmanship, Whalen Storage will repair or replace this item at our discretion without charge. Warranty is void if product has been assembled incorrectly, misused, abused by overloading, altered in any way or damaged due to accident.

This manual is also suitable for:

Wsuc-4w

Table of Contents