Table of Contents
Advertisement
Si00-973
8. Removal of Electrical Box
Procedure
Step
1. Disconnect the
connecting wires
1
Remove the 3 screws
to remove the wiring
fixture.
Then, remove the all
screws to disconnect
the power supply cable
and the connecting
wires.
2. Removal of the electrical
box
Release the outdoor
1
temperature thermistor
from the holder.
Lift up the guard net to
2
remove.
Removal Procedure
Warning
Be sure to wait 10 minutes or more after turning off all power supplies
before disassembling work.
Procedure
Wire fixture
(R18542)
Outdoor temperature thermistor
(R10571)
Guard net
(R10572)
Removal of Electrical Box
Points
When reassembling, fasten
the wires with screws on the
terminal board.
The terminal board is united
resin formation.
17
Advertisement
Table of Contents
