Table of Contents
Advertisement
Si00-973
10.Removal of Sound Blankets
Procedure
Step
1. Removal of the right side
panel
1
Remove the 5 screws
to remove the right side
panel.
2. Removal of the partition
plate
1
Remove the 2 screws
to remove the partition
plate.
2
Since there are hooks
on the partition plate, lift
up once and pull out
toward yourself to
remove it.
Removal Procedure
Warning
Be sure to wait 10 minutes or more after turning off all power supplies
before disassembling work.
Procedure
Right side panel
Partition plate
Removal of Sound Blankets
Points
Preparation
Remove the electrical box
beforehand.
(R10602)
When assembling, make
sure to catch the lower hook
of the partition plate.
(R10603)
Remove the screw of the
reactor, and then remove
the reactor.
(R10604)
27
Advertisement
Table of Contents
