Leckey Pronestander User Manual page 11

9.2 ATTACHING
THE TRAY
The Pronestander tray is attached
by sliding the outer poles already
attached to the tray over the inner
poles already attached to the frame
and then tightening the bolts
tray is then secured with a tray pin
into one of the slots
the frame.
. The
on the side of
Pronestander User Manual p11
9.3 ATTACHING THE
SANDALS
Insert the required attachment bolt
along with the retention plate
Place a rubber lid
and bottom of the sandal. Fasten
using the four screws
remove or replace the attachment
bolt, reverse this process.
on, both, the top
provided. To