Imperial DABMAN 14 Manual page 73

9. SYSTEM SETTINGS
[DD-MM-YYYY] (day, month, year)
[MM-DD-YYYY] (month,day, year)
> To adopt the change press the Select button.
9.4 Display brightness
You can adjust the display brightness for both operation and standby mode
(only available when the radio is connected to the power main).
> In the submenu [System] use the button <Tune or Tune> to
select backlight] and press Select.
> Use the <Tune or Tune> and Select buttons to choose one of
following functions:
[On level] controls the brightness in the normal, switched-on state. You can
choose between [High], [Medium] and [Low] brightness levels.
> Use the <Tune or Tune> buttons to choose a
brightness level and press the Select button to store you setting.
[Dim level] adjusts the brightness in standby mode. You can
choose between [High], [Medium] and [Low] brightness levels.
> Use the <Tune or Tune> buttons to choose a
brightness level and press the Select button to store you setting.
When set to [Off], the display always remains active with the On
setting.
9.5 Language
> In the submenu [System] use the button <Tune or
Tune> to select [Language] and press the Select button.
> Use the <Tune or Tune> buttons to choose one of the
available languages and confirm your selection by pressing the
Select button.
9.6 Factory Reset
If you change the location of the device, e.g. when moving house, the sto-
red stations may no longer be receivable. In this case, by restoring the
factory settings, you can delete all stored stations and then start a new
station scan.
73
IMPERIAL DABMAN 14
E