Imperial DABMAN 14 Manual page 71

9. SYSTEM SETTINGS
> The alarm volume is the last setting to be made with the
<Tune, Tune> buttons.
> To adopt the change press the Select button.
> Finally, you can generally switch on the alarm clock
or leave it deactivated for now.
Select [On] and press the Select button to activate the alarm. The set-
tings are saved and the alarm clock is active. This is indicated by a bell
symbol in the display.
9.2.2 Switching off the alarm clock
If the alarm tone is active, the alarm can be switched off by pressing the
Standby button (7).
9.2.3 Snooze
If the alarm tone is active, the snooze function can be activated by pressing
the Select button. The alarm tone will be muted for the next 10 minutes
and then repeats.
9.3 Date and time settings
9.3.1 Manually set the time/ date
Depending on the setting of the time update (item 9.3.2), you will have to
set the time and date manually.
In the submenu [System] use the button <Tune or
>
Tune> to select [Time] and press the Select button.
Use <Tune or Tune> to select
>
[set time/ date] and press Select.
> The first digits (hours) of the time flash and can be changed with
the <Tune or Tune> buttons.
The Tune> button increases the figure, the <Tune button
decreases the figure.
To adopt the settings press the Select button.
>
> After that, the next digits (minutes) of the time flash
and can also be changed as described above.
> After each setting, press the Select button to jump to the next
setting.
71
IMPERIAL DABMAN 14
E