Imperial DABMAN 14 Manual page 61

5. OPERATION AND FIRST USE
> Plug the headphone plug into the headphone jack. (11) on the
back of the device. The sound is now solely played via the head
phones; the loudspeaker is muted.
> If you want the sound to be played by the speakers again, unplug
the headphone plug from the headphone jack on the device.
5.2.5. Switching on the device
To ensure a good DAB+/FM(UKW) signal, completely pull out the antenna
located on the back of the device. Please note section 5.2.3 on this matter.
First prepare the radio for operation as described in section 5.2.
> Press the Standby button (7)to switch on the radio. After switching on
for the first time, you must first set the [Language]. To do so, select one
of the available languages with the <Tune or Tune> buttons and confirm
your selection by pressing the Select button. The device then automatically
performs a complete search in DAB mode. During the search, the pro-
gress and the number of digital radio stations found are displayed. The first
DAB+ programme is played after the station search has been completed.
5.2.6. Switching off the device
When connected to the power:
> Press and hold the Standby button (7) to switch the unit to Standby
mode. The message [Standby] appears briefly on the display. The time and
date are displayed. You can change the display brightness in standby mode
as described in section 9.4.
In battery mode:
In battery mode, the device is always switched off by holding down the
standby button (7). The display briefly displays the information [Power off].
The time and date are not shown. The standby mode is not available in
battery mode.
5.2.7. Switching DAB+/FM mode
Press the MODE button (1) briefly to switch between DAB+
>
(Digital Radio) and FM (UKW).
61
IMPERIAL DABMAN 14
E