Cleaning The Detergent Dispenser - Whirlpool FSCR12441 Health & Safety, Use & Care And Installation Manual

Table of Contents

Advertisement

CLEANING THE DETERGENT
DISPENSER
1.
Remove the detergent dispenser by pressing
down the release button and pulling out the
detergent dispenser .
2.
Carefully remove the cover from the detergent
dispenser . While removing it, take care of the
functional parts on the bottom side of the cover .
3.
OPTIONAL: If a tank still contains a good
quantity of detergent or fabric softener, this can
be collected for reuse . The two rubber stoppers
on the rear bottom of the detergent dispenser are
removable . If needed, remove the stopper and
collect the escaping detergent or fabric softener in
a container .
4.
Carefully clean the parts under running water,
removing detergent or fabric softener residues .
Particularly take care not to damage the functional
parts on the reverse of the tank cover .
5.
Wipe the parts dry with a soft cloth .
6.
Only if you have removed the rubber stoppers
to empty the tank content (step 3): Plug in the
rubber stoppers again . Make sure that they are
completely plugged in, to avoid that detergent
can escape accidentally .
EN
45

Advertisement

Table of Contents
loading

This manual is also suitable for:

859206215010

Table of Contents