Cleaning The Mesh Filters In The Water Supply Hose; Cleaning The Detergent Dispenser - Whirlpool FFCR70420 User Manual

User manual

CLEANING THE MESH FILTERS IN THE WATER SUPPLY HOSE

1.
Close water tap and unscrew the inlet hose.
2.
Clean the mesh filter at the hose's end carefully with a fine
brush.

CLEANING THE DETERGENT DISPENSER

1.
Remove the detergent dispenser by pressing on the
release button and at the same time pulling out the
detergent dispenser.
2.
Remove the insert from the softener compartment.
14
3.
Now unscrew the inlet hose on the back of the washing
machine by hand. Pull out the mesh filter from the valve
on the back of the washing machine with pliers and
carefully clean it.
4.
Insert the mesh filter again. Connect the inlet hose to
water tap and washing machine again. Do not use a tool
to connect the inlet hose. Open the water tap and check
that all connections are tight.
3.
Clean all parts under running water, removing all detergent
or softener residues .
4.
Wipe the parts dry with a soft cloth.
5.
Reinstall the detergent dispenser and push it back into
the detergent compartment .