Whirlpool FSCR12441 Health & Safety, Use & Care And Installation Manual page 52

PROBLEM
Door is locked, with or without
failure indication, and the
programme does not run .
Drum light (if available) does not
work anymore .
Programme cannot be started;
display indicates that detergent
dispenser is not properly inserted .
Display indicates demo mode
52
POSSIBLE CAUSE
Door is locked in case of power
breakdown .
Washing machine is in a standstill
(as described in previous section
"Washing machine stands still...) .
Water level or temperature too
high, or electrical component
failure .
Light bulb needs to be replaced .
Detergent dispenser is not fully
inserted in the compartment; the
dispenser is not in contact with the
connection point at the end of the
compartment .
The washing machine's
demonstration mode destined for
trade partners has not been exited
after a demonstration
SOLUTION
Programme will continue
automatically as soon as the mains
is available again .
Programme will continue
automatically after the origin of the
standstill does not persist anymore .
See instructions for failure
"Service": doorlock failure" / FdL /
F29 in section Failure indicators .
Call our After-Sales Service to
exchange the light bulb .
Carefully push the detergent
dispenser into the compartment as
far as it goes .
Simultaneously press the second
button from the right and the
second button from the left
side on the control panel . The
demonstration mode will be
ended, and the washing machine
can be operated according to the
provided instructions .