Functions - Whirlpool FSCR12441 Health & Safety, Use & Care And Installation Manual

FUNCTIONS

ON/OFF
START/PAUSE
KEY LOCK
AUTO DOSING
1 2
REMOTE CONTROL
To switch on the washing machine:
press the button until the Start/Pause
button lights up .
To cancel a running programme:
press and hold the button until the
display indicates that the programme
is cancelled; the washing machine
will perform a drain cycle to end the
program .
• To start the programme, after you
have finished your settings
This function allows you to lock the
buttons and the keys of the control
panel against unwanted operation,
for example by small children .
The washing machine must be
switched on .
Press and hold the option
button for at least 3 seconds;
the display indicates that the
keys are locked .
See separate section Auto dosing –
first use / daily use .
See separate section 6
Live Feature/Setup procedure and
6 Sense Live Remote control/Daily
th
use .
To switch off the washing machine
after programme end:
press the key until the lights go off .
• To pause a running programme
• To continue a paused programme
Keys and buttons are locked now .
The only working function is "On/
Off" to switch the washing machine
off . – The key lock remains active also
if you switch off and on again the
washing machine .
To unlock the buttons/keys, press
and hold the option button again for
at least 3 seconds, until the display
indicates that the keys are unlocked .
Sense
th
EN
25