Whirlpool FSCR12441 Health & Safety, Use & Care And Installation Manual page 36

AUTOMATIC SETUP PROCEDURE
This procedure is applicable only if your router
supports WPS 2.0 (or greater)
1.
Turn on your router and activate the WPS (Wi-
Fi Protected Setup) feature . The WPS indicator light
turns on and the feature remains active for about
2 minutes .
2.
While the WPS in on, press the Remote
Control button . It will operate as a shortcut to
the Live menu . Otherwise select the Live
menu from the Setting menu using the UP
and DOWN key and press the OK key .
3.
Select the Setup feature from the display
menu using the UP and DOWN key and press
the OK key .
The Connection Status indicator starts blin-
king fast .
36
4.
The Connection Status indicator starts
blinking slow as the connection with the
router is established .
As the Connection Status indicator becomes
steady, the connection has been established and
the washing machine is connected to the Internet .
5.
The setup procedure is complete .